Remove NETLOGIC_ prefix from gpio register definitions, this will bring it in-line with the other Netlogic headers. Having NETLOGIC prefix here is misleading because these are XLR/XLS specific register definitions. Signed-off-by: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx> --- arch/mips/include/asm/netlogic/xlr/gpio.h | 59 +++++++++++++++-------------- arch/mips/netlogic/xlr/setup.c | 2 +- 2 files changed, 31 insertions(+), 30 deletions(-) diff --git a/arch/mips/include/asm/netlogic/xlr/gpio.h b/arch/mips/include/asm/netlogic/xlr/gpio.h index 51f6ad4..8492e83 100644 --- a/arch/mips/include/asm/netlogic/xlr/gpio.h +++ b/arch/mips/include/asm/netlogic/xlr/gpio.h @@ -35,39 +35,40 @@ #ifndef _ASM_NLM_GPIO_H #define _ASM_NLM_GPIO_H -#define NETLOGIC_GPIO_INT_EN_REG 0 -#define NETLOGIC_GPIO_INPUT_INVERSION_REG 1 -#define NETLOGIC_GPIO_IO_DIR_REG 2 -#define NETLOGIC_GPIO_IO_DATA_WR_REG 3 -#define NETLOGIC_GPIO_IO_DATA_RD_REG 4 +#define GPIO_INT_EN_REG 0 +#define GPIO_INPUT_INVERSION_REG 1 +#define GPIO_IO_DIR_REG 2 +#define GPIO_IO_DATA_WR_REG 3 +#define GPIO_IO_DATA_RD_REG 4 -#define NETLOGIC_GPIO_SWRESET_REG 8 -#define NETLOGIC_GPIO_DRAM1_CNTRL_REG 9 -#define NETLOGIC_GPIO_DRAM1_RATIO_REG 10 -#define NETLOGIC_GPIO_DRAM1_RESET_REG 11 -#define NETLOGIC_GPIO_DRAM1_STATUS_REG 12 -#define NETLOGIC_GPIO_DRAM2_CNTRL_REG 13 -#define NETLOGIC_GPIO_DRAM2_RATIO_REG 14 -#define NETLOGIC_GPIO_DRAM2_RESET_REG 15 -#define NETLOGIC_GPIO_DRAM2_STATUS_REG 16 +#define GPIO_SWRESET_REG 8 +#define GPIO_DRAM1_CNTRL_REG 9 +#define GPIO_DRAM1_RATIO_REG 10 +#define GPIO_DRAM1_RESET_REG 11 +#define GPIO_DRAM1_STATUS_REG 12 +#define GPIO_DRAM2_CNTRL_REG 13 +#define GPIO_DRAM2_RATIO_REG 14 +#define GPIO_DRAM2_RESET_REG 15 +#define GPIO_DRAM2_STATUS_REG 16 -#define NETLOGIC_GPIO_PWRON_RESET_CFG_REG 21 -#define NETLOGIC_GPIO_BIST_ALL_GO_STATUS_REG 24 -#define NETLOGIC_GPIO_BIST_CPU_GO_STATUS_REG 25 -#define NETLOGIC_GPIO_BIST_DEV_GO_STATUS_REG 26 +#define GPIO_PWRON_RESET_CFG_REG 21 +#define GPIO_BIST_ALL_GO_STATUS_REG 24 +#define GPIO_BIST_CPU_GO_STATUS_REG 25 +#define GPIO_BIST_DEV_GO_STATUS_REG 26 -#define NETLOGIC_GPIO_FUSE_BANK_REG 35 -#define NETLOGIC_GPIO_CPU_RESET_REG 40 -#define NETLOGIC_GPIO_RNG_REG 43 +#define GPIO_FUSE_BANK_REG 35 +#define GPIO_CPU_RESET_REG 40 +#define GPIO_RNG_REG 43 -#define NETLOGIC_PWRON_RESET_PCMCIA_BOOT 17 -#define NETLOGIC_GPIO_LED_BITMAP 0x1700000 -#define NETLOGIC_GPIO_LED_0_SHIFT 20 -#define NETLOGIC_GPIO_LED_1_SHIFT 24 +#define PWRON_RESET_PCMCIA_BOOT 17 -#define NETLOGIC_GPIO_LED_OUTPUT_CODE_RESET 0x01 -#define NETLOGIC_GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02 -#define NETLOGIC_GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03 -#define NETLOGIC_GPIO_LED_OUTPUT_CODE_MAIN 0x04 +#define GPIO_LED_BITMAP 0x1700000 +#define GPIO_LED_0_SHIFT 20 +#define GPIO_LED_1_SHIFT 24 + +#define GPIO_LED_OUTPUT_CODE_RESET 0x01 +#define GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02 +#define GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03 +#define GPIO_LED_OUTPUT_CODE_MAIN 0x04 #endif diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c index c9d066d..81b1d31 100644 --- a/arch/mips/netlogic/xlr/setup.c +++ b/arch/mips/netlogic/xlr/setup.c @@ -85,7 +85,7 @@ static void nlm_linux_exit(void) gpiobase = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET); /* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */ - nlm_write_reg(gpiobase, NETLOGIC_GPIO_SWRESET_REG, 1); + nlm_write_reg(gpiobase, GPIO_SWRESET_REG, 1); for ( ; ; ) cpu_wait(); } -- 1.7.5.4
