Starting other threads in the core will change the number of
TLB entries of a CPU. Re-calculate current_cpu_data.tlbsize
on the boot cpu after enabling and waking up other threads.
The secondary CPUs do not need this logic because the threads
are enabled on the secondary cores at wakeup and before cpu_probe.
Signed-off-by: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
---
arch/mips/netlogic/xlp/setup.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index acb677a..b3df7c2 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -82,8 +82,10 @@ void __init prom_free_prom_memory(void)
void xlp_mmu_init(void)
{
+ /* enable extended TLB and Large Fixed TLB */
write_c0_config6(read_c0_config6() | 0x24);
- current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+ /* set page mask of Fixed TLB in config7 */
write_c0_config7(PM_DEFAULT_MASK >>
(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
}
@@ -100,6 +102,10 @@ void __init prom_init(void)
nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
#ifdef CONFIG_SMP
nlm_wakeup_secondary_cpus(0xffffffff);
+
+ /* update TLB size after waking up threads */
+ current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
register_smp_ops(&nlm_smp_ops);
#endif
}
--
1.7.5.4
