Add a machine driver suitable for the AC97 part on the DB1000/DB1500/DB1100
boards.
Run-tested on DB1500.
Signed-off-by: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
---
V4/V5: no changes.
V3: split off from patch 1, implemented new machine code.
arch/mips/alchemy/devboards/db1x00/platform.c | 48 ++++++++++++++++
sound/soc/au1x/Kconfig | 9 +++
sound/soc/au1x/Makefile | 2 +
sound/soc/au1x/db1000.c | 75 +++++++++++++++++++++++++
4 files changed, 134 insertions(+), 0 deletions(-)
create mode 100644 sound/soc/au1x/db1000.c
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c
index 978d5ab..7057d28 100644
--- a/arch/mips/alchemy/devboards/db1x00/platform.c
+++ b/arch/mips/alchemy/devboards/db1x00/platform.c
@@ -19,8 +19,11 @@
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1000_dma.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
@@ -85,6 +88,45 @@
#endif
#endif
+static struct resource alchemy_ac97c_res[] = {
+ [0] = {
+ .start = AU1000_AC97_PHYS_ADDR,
+ .end = AU1000_AC97_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMA_ID_AC97C_TX,
+ .end = DMA_ID_AC97C_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMA_ID_AC97C_RX,
+ .end = DMA_ID_AC97C_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device alchemy_ac97c_dev = {
+ .name = "alchemy-ac97c",
+ .id = -1,
+ .resource = alchemy_ac97c_res,
+ .num_resources = ARRAY_SIZE(alchemy_ac97c_res),
+};
+
+static struct platform_device alchemy_ac97c_dma_dev = {
+ .name = "alchemy-pcm-dma",
+ .id = 0,
+};
+
+static struct platform_device db1x00_codec_dev = {
+ .name = "ac97-codec",
+ .id = -1,
+};
+
+static struct platform_device db1x00_audio_dev = {
+ .name = "db1000-audio",
+};
+
static int __init db1xxx_dev_init(void)
{
#ifdef DB1XXX_HAS_PCMCIA
@@ -113,6 +155,12 @@ static int __init db1xxx_dev_init(void)
1);
#endif
db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
+
+ platform_device_register(&db1x00_codec_dev);
+ platform_device_register(&alchemy_ac97c_dma_dev);
+ platform_device_register(&alchemy_ac97c_dev);
+ platform_device_register(&db1x00_audio_dev);
+
return 0;
}
device_initcall(db1xxx_dev_init);
diff --git a/sound/soc/au1x/Kconfig b/sound/soc/au1x/Kconfig
index 0460b42..6d59254 100644
--- a/sound/soc/au1x/Kconfig
+++ b/sound/soc/au1x/Kconfig
@@ -41,6 +41,15 @@ config SND_SOC_AU1XI2SC
##
## Boards
##
+config SND_SOC_DB1000
+ tristate "DB1000 Audio support"
+ depends on SND_SOC_AU1XAUDIO
+ select SND_SOC_AU1XAC97C
+ select SND_SOC_AC97_CODEC
+ help
+ Select this option to enable AC97 audio on the early DB1x00 series
+ of boards (DB1000/DB1500/DB1100).
+
config SND_SOC_DB1200
tristate "DB1200 AC97+I2S audio support"
depends on SND_SOC_AU1XPSC
diff --git a/sound/soc/au1x/Makefile b/sound/soc/au1x/Makefile
index ff5531e..9207105 100644
--- a/sound/soc/au1x/Makefile
+++ b/sound/soc/au1x/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_SND_SOC_AU1XAC97C) += snd-soc-au1x-ac97c.o
obj-$(CONFIG_SND_SOC_AU1XI2SC) += snd-soc-au1x-i2sc.o
# Boards
+snd-soc-db1000-objs := db1000.o
snd-soc-db1200-objs := db1200.o
+obj-$(CONFIG_SND_SOC_DB1000) += snd-soc-db1000.o
obj-$(CONFIG_SND_SOC_DB1200) += snd-soc-db1200.o
diff --git a/sound/soc/au1x/db1000.c b/sound/soc/au1x/db1000.c
new file mode 100644
index 0000000..127477a
--- /dev/null
+++ b/sound/soc/au1x/db1000.c
@@ -0,0 +1,75 @@
+/*
+ * DB1000/DB1500/DB1100 ASoC audio fabric support code.
+ *
+ * (c) 2011 Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "psc.h"
+
+static struct snd_soc_dai_link db1000_ac97_dai = {
+ .name = "AC97",
+ .stream_name = "AC97 HiFi",
+ .codec_dai_name = "ac97-hifi",
+ .cpu_dai_name = "alchemy-ac97c",
+ .platform_name = "alchemy-pcm-dma.0",
+ .codec_name = "ac97-codec",
+};
+
+static struct snd_soc_card db1000_ac97 = {
+ .name = "DB1000_AC97",
+ .dai_link = &db1000_ac97_dai,
+ .num_links = 1,
+};
+
+static int __devinit db1000_audio_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &db1000_ac97;
+ card->dev = &pdev->dev;
+ return snd_soc_register_card(card);
+}
+
+static int __devexit db1000_audio_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ snd_soc_unregister_card(card);
+ return 0;
+}
+
+static struct platform_driver db1000_audio_driver = {
+ .driver = {
+ .name = "db1000-audio",
+ .owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = db1000_audio_probe,
+ .remove = __devexit_p(db1000_audio_remove),
+};
+
+static int __init db1000_audio_load(void)
+{
+ return platform_driver_register(&db1000_audio_driver);
+}
+
+static void __exit db1000_audio_unload(void)
+{
+ platform_driver_unregister(&db1000_audio_driver);
+}
+
+module_init(db1000_audio_load);
+module_exit(db1000_audio_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DB1000/DB1500/DB1100 ASoC audio");
+MODULE_AUTHOR("Manuel Lauss");
--
1.7.6
