Re: [PATCH V8] MIPS: lantiq: add NOR flash support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2011-04-05 at 16:19 +0200, John Crispin wrote:

> +/* 
> + * The NOR flash is connected to the same external bus unit (EBU) as PCI.
> + * To make PCI work we need to enable the endianess swapping for the address
> + * written to the EBU. This endianess swapping works for PCI correctly but
> + * fails for attached NOR devices. To workaround this we need to use a complex
> + * map. The workaround involves swapping all addresses whilste probing the chip.
> + * Once probing is complete we stop swapping the addresses but swizzle the
> + * unlock addresses to ensure that access to the NOR device works correctly.
> + */
> +
> +enum ltq_nor_state {
> +	LTQ_NOR_PROBING,
> +	LTQ_NOR_NORMAL
> +};

You do not have to re-send because of this, just a note that in this
case it makes more sense to use anonymous enum. Indeed, you do not need
this 'ltq_nor_state' name at all, and C enums are not proper types
anyway (no real type-checking), so it is just a tiny bit nicer to do:

enum {
	LTQ_NOR_PROBING,
	LTQ_NOR_NORMAL
};

But this is not important at all, just a side note :-)

-- 
Best Regards,
Artem Bityutskiy (ÐÑÑÑÐ ÐÐÑÑÑÐÐÐ)




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux