I think that's a better solution for the problem I said so please commit
this patch rather previous one...
---
Don't use ttyS[0-1] serial device name for board specific PNX8XXX UART
serial. Rather create ttyPNX[0-1]. Also changed minor number to be
different with sa1100 serial driver one.
Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@xxxxxxxxx>
---
drivers/serial/pnx8xxx_uart.c | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 22e30d2..96870f1 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -34,9 +34,8 @@
#include <asm/io.h>
#include <asm/irq.h>
-/* We'll be using StrongARM sa1100 serial port major/minor */
#define SERIAL_PNX8XXX_MAJOR 204
-#define MINOR_START 5
+#define MINOR_START 96
#define NR_PORTS 2
@@ -636,7 +635,7 @@ static struct uart_ops pnx8xxx_pops = {
/*
* Setup the PNX8XXX serial ports.
*
- * Note also that we support "console=ttySx" where "x" is either 0 or 1.
+ * Note also that we support "console=ttyPNXx" where "x" is either 0 or 1.
*/
static void __init pnx8xxx_init_ports(void)
{
@@ -728,7 +727,7 @@ pnx8xxx_console_setup(struct console *co, char *options)
static struct uart_driver pnx8xxx_reg;
static struct console pnx8xxx_console = {
- .name = "ttyS",
+ .name = "ttyPNX",
.write = pnx8xxx_console_write,
.device = uart_console_device,
.setup = pnx8xxx_console_setup,
@@ -752,8 +751,8 @@ console_initcall(pnx8xxx_rs_console_init);
static struct uart_driver pnx8xxx_reg = {
.owner = THIS_MODULE,
- .driver_name = "ttyS",
- .dev_name = "ttyS",
+ .driver_name = "ttyPNX",
+ .dev_name = "ttyPNX",
.major = SERIAL_PNX8XXX_MAJOR,
.minor = MINOR_START,
.nr = NR_PORTS,
--
1.5.6.3
