Don't use ttyS* serial device name for board specific PNX8XXX UART
serial. Rather create ttySA* to reflect that the driver uses device with
major:minor numbers for SA1100 serial driver.
Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@xxxxxxxxx>
---
drivers/serial/pnx8xxx_uart.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 22e30d2..6785ee9 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -636,7 +636,7 @@ static struct uart_ops pnx8xxx_pops = {
/*
* Setup the PNX8XXX serial ports.
*
- * Note also that we support "console=ttySx" where "x" is either 0 or 1.
+ * Note also that we support "console=ttySAx" where "x" is either 0 or 1.
*/
static void __init pnx8xxx_init_ports(void)
{
@@ -728,7 +728,7 @@ pnx8xxx_console_setup(struct console *co, char *options)
static struct uart_driver pnx8xxx_reg;
static struct console pnx8xxx_console = {
- .name = "ttyS",
+ .name = "ttySA",
.write = pnx8xxx_console_write,
.device = uart_console_device,
.setup = pnx8xxx_console_setup,
@@ -752,8 +752,8 @@ console_initcall(pnx8xxx_rs_console_init);
static struct uart_driver pnx8xxx_reg = {
.owner = THIS_MODULE,
- .driver_name = "ttyS",
- .dev_name = "ttyS",
+ .driver_name = "ttySA",
+ .dev_name = "ttySA",
.major = SERIAL_PNX8XXX_MAJOR,
.minor = MINOR_START,
.nr = NR_PORTS,
--
1.5.6.3
