Move common/reset.c contents to evalboard code where it belongs.
Add reboot hook initialization to mtx-1 and xxs1500 boards.
Signed-off-by: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
---
arch/mips/alchemy/common/Makefile | 2 +-
arch/mips/alchemy/common/reset.c | 189 ------------------------------
arch/mips/alchemy/common/setup.c | 39 -------
arch/mips/alchemy/evalboards/common.c | 191 +++++++++++++++++++++++++++++++
arch/mips/alchemy/evalboards/db1x00.c | 4 +
arch/mips/alchemy/evalboards/pb1000.c | 3 +
arch/mips/alchemy/evalboards/pb1100.c | 3 +
arch/mips/alchemy/evalboards/pb1200.c | 3 +
arch/mips/alchemy/evalboards/pb1500.c | 3 +
arch/mips/alchemy/evalboards/pb1550.c | 3 +
arch/mips/alchemy/mtx-1/board_setup.c | 5 +-
arch/mips/alchemy/xxs1500/board_setup.c | 5 +-
12 files changed, 219 insertions(+), 231 deletions(-)
delete mode 100644 arch/mips/alchemy/common/reset.c
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index df48fd6..028e3b9 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -5,7 +5,7 @@
# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
-obj-y += prom.o irq.o puts.o time.o reset.o \
+obj-y += prom.o irq.o puts.o time.o \
au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
sleeper.o cputable.o dma.o dbdma.o gpio.o
diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c
deleted file mode 100644
index d555429..0000000
--- a/arch/mips/alchemy/common/reset.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Au1xx0 reset routines.
- *
- * Copyright 2001, 2006, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/cacheflush.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-extern int au_sleep(void);
-
-void au1000_restart(char *command)
-{
- /* Set all integrated peripherals to disabled states */
- extern void board_reset(void);
- u32 prid = read_c0_prid();
-
- printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
-
- switch (prid & 0xFF000000) {
- case 0x00000000: /* Au1000 */
- au_writel(0x02, 0xb0000010); /* ac97_enable */
- au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
- asm("sync");
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb0300040); /* ir_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb0520000); /* macen0 */
- au_writel(0x00, 0xb0520004); /* macen1 */
- au_writel(0x00, 0xb1000008); /* i2s_enable */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1200100); /* uart1_enable */
- au_writel(0x00, 0xb1300100); /* uart2_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x02, 0xb1600100); /* ssi0_enable */
- au_writel(0x02, 0xb1680100); /* ssi1_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- case 0x01000000: /* Au1500 */
- au_writel(0x02, 0xb0000010); /* ac97_enable */
- au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
- asm("sync");
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb1520000); /* macen0 */
- au_writel(0x00, 0xb1520004); /* macen1 */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- case 0x02000000: /* Au1100 */
- au_writel(0x02, 0xb0000010); /* ac97_enable */
- au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
- asm("sync");
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb0300040); /* ir_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb0520000); /* macen0 */
- au_writel(0x00, 0xb1000008); /* i2s_enable */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1200100); /* uart1_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x02, 0xb1600100); /* ssi0_enable */
- au_writel(0x02, 0xb1680100); /* ssi1_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- case 0x03000000: /* Au1550 */
- au_writel(0x00, 0xb1a00004); /* psc 0 */
- au_writel(0x00, 0xb1b00004); /* psc 1 */
- au_writel(0x00, 0xb0a00004); /* psc 2 */
- au_writel(0x00, 0xb0b00004); /* psc 3 */
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb1520000); /* macen0 */
- au_writel(0x00, 0xb1520004); /* macen1 */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1200100); /* uart1_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- }
-
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
-
- /* Give board a chance to do a hardware reset */
- board_reset();
-
- /* Jump to the beggining in case board_reset() is empty */
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void au1000_halt(void)
-{
-#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
- /* Power off system */
- printk(KERN_NOTICE "\n** Powering off...\n");
- au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
- au_sync();
- while (1); /* should not get here */
-#else
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-#ifdef CONFIG_MIPS_MIRAGE
- au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
-#endif
-#ifdef CONFIG_MIPS_DB1200
- au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
-#endif
-#ifdef CONFIG_PM
- au_sleep();
-
- /* Should not get here */
- printk(KERN_ERR "Unable to put CPU in sleep mode\n");
- while (1);
-#else
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-#endif
-#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
-}
-
-void au1000_power_off(void)
-{
- au1000_halt();
-}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 1ac6b06..cfb531e 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -28,25 +28,14 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/module.h>
-#include <linux/pm.h>
-
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-
#include <au1000.h>
-#include <prom.h>
extern void __init board_setup(void);
-extern void au1000_restart(char *);
-extern void au1000_halt(void);
-extern void au1000_power_off(void);
extern void set_cpuspec(void);
void __init plat_mem_setup(void)
{
struct cpu_spec *sp;
- char *argptr;
unsigned long prid, cpufreq, bclk;
set_cpuspec();
@@ -79,34 +68,6 @@ void __init plat_mem_setup(void)
/* Clear to obtain best system bus performance */
clear_c0_config(1 << 19); /* Clear Config[OD] */
- argptr = prom_getcmdline();
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
-
-#ifdef CONFIG_FB_AU1100
- argptr = strstr(argptr, "video=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- /* default panel */
- /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
- }
-#endif
-
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
- /* au1000 does not support vra, au1500 and au1100 do */
- strcat(argptr, " au1000_audio=vra");
- argptr = prom_getcmdline();
-#endif
- _machine_restart = au1000_restart;
- _machine_halt = au1000_halt;
- pm_power_off = au1000_power_off;
-
/* IO/MEM resources. */
set_io_port_base(0);
ioport_resource.start = IOPORT_RESOURCE_START;
diff --git a/arch/mips/alchemy/evalboards/common.c b/arch/mips/alchemy/evalboards/common.c
index d112fcf..7c78d54 100644
--- a/arch/mips/alchemy/evalboards/common.c
+++ b/arch/mips/alchemy/evalboards/common.c
@@ -29,10 +29,15 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/pm.h> /* pm_power_off */
#include <asm/bootinfo.h>
+#include <asm/cacheflush.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/reboot.h>
#include <prom.h>
+extern int au_sleep(void);
+
#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_DB1000) || \
defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || \
defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_DB1500) || \
@@ -60,3 +65,189 @@ void __init prom_init(void)
strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
+
+static void evalboard_restart(char *command)
+{
+ /* Set all integrated peripherals to disabled states */
+ extern void board_reset(void);
+ u32 prid = read_c0_prid();
+
+ printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
+
+ switch (prid & 0xFF000000) {
+ case 0x00000000: /* Au1000 */
+ au_writel(0x02, 0xb0000010); /* ac97_enable */
+ au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
+ asm("sync");
+ au_writel(0x00, 0xb017fffc); /* usbh_enable */
+ au_writel(0x00, 0xb0200058); /* usbd_enable */
+ au_writel(0x00, 0xb0300040); /* ir_enable */
+ au_writel(0x00, 0xb4004104); /* mac dma */
+ au_writel(0x00, 0xb4004114); /* mac dma */
+ au_writel(0x00, 0xb4004124); /* mac dma */
+ au_writel(0x00, 0xb4004134); /* mac dma */
+ au_writel(0x00, 0xb0520000); /* macen0 */
+ au_writel(0x00, 0xb0520004); /* macen1 */
+ au_writel(0x00, 0xb1000008); /* i2s_enable */
+ au_writel(0x00, 0xb1100100); /* uart0_enable */
+ au_writel(0x00, 0xb1200100); /* uart1_enable */
+ au_writel(0x00, 0xb1300100); /* uart2_enable */
+ au_writel(0x00, 0xb1400100); /* uart3_enable */
+ au_writel(0x02, 0xb1600100); /* ssi0_enable */
+ au_writel(0x02, 0xb1680100); /* ssi1_enable */
+ au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
+ au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
+ au_writel(0x00, 0xb1900028); /* sys_clksrc */
+ au_writel(0x10, 0xb1900060); /* sys_cpupll */
+ au_writel(0x00, 0xb1900064); /* sys_auxpll */
+ au_writel(0x00, 0xb1900100); /* sys_pininputen */
+ break;
+ case 0x01000000: /* Au1500 */
+ au_writel(0x02, 0xb0000010); /* ac97_enable */
+ au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
+ asm("sync");
+ au_writel(0x00, 0xb017fffc); /* usbh_enable */
+ au_writel(0x00, 0xb0200058); /* usbd_enable */
+ au_writel(0x00, 0xb4004104); /* mac dma */
+ au_writel(0x00, 0xb4004114); /* mac dma */
+ au_writel(0x00, 0xb4004124); /* mac dma */
+ au_writel(0x00, 0xb4004134); /* mac dma */
+ au_writel(0x00, 0xb1520000); /* macen0 */
+ au_writel(0x00, 0xb1520004); /* macen1 */
+ au_writel(0x00, 0xb1100100); /* uart0_enable */
+ au_writel(0x00, 0xb1400100); /* uart3_enable */
+ au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
+ au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
+ au_writel(0x00, 0xb1900028); /* sys_clksrc */
+ au_writel(0x10, 0xb1900060); /* sys_cpupll */
+ au_writel(0x00, 0xb1900064); /* sys_auxpll */
+ au_writel(0x00, 0xb1900100); /* sys_pininputen */
+ break;
+ case 0x02000000: /* Au1100 */
+ au_writel(0x02, 0xb0000010); /* ac97_enable */
+ au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
+ asm("sync");
+ au_writel(0x00, 0xb017fffc); /* usbh_enable */
+ au_writel(0x00, 0xb0200058); /* usbd_enable */
+ au_writel(0x00, 0xb0300040); /* ir_enable */
+ au_writel(0x00, 0xb4004104); /* mac dma */
+ au_writel(0x00, 0xb4004114); /* mac dma */
+ au_writel(0x00, 0xb4004124); /* mac dma */
+ au_writel(0x00, 0xb4004134); /* mac dma */
+ au_writel(0x00, 0xb0520000); /* macen0 */
+ au_writel(0x00, 0xb1000008); /* i2s_enable */
+ au_writel(0x00, 0xb1100100); /* uart0_enable */
+ au_writel(0x00, 0xb1200100); /* uart1_enable */
+ au_writel(0x00, 0xb1400100); /* uart3_enable */
+ au_writel(0x02, 0xb1600100); /* ssi0_enable */
+ au_writel(0x02, 0xb1680100); /* ssi1_enable */
+ au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
+ au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
+ au_writel(0x00, 0xb1900028); /* sys_clksrc */
+ au_writel(0x10, 0xb1900060); /* sys_cpupll */
+ au_writel(0x00, 0xb1900064); /* sys_auxpll */
+ au_writel(0x00, 0xb1900100); /* sys_pininputen */
+ break;
+ case 0x03000000: /* Au1550 */
+ au_writel(0x00, 0xb1a00004); /* psc 0 */
+ au_writel(0x00, 0xb1b00004); /* psc 1 */
+ au_writel(0x00, 0xb0a00004); /* psc 2 */
+ au_writel(0x00, 0xb0b00004); /* psc 3 */
+ au_writel(0x00, 0xb017fffc); /* usbh_enable */
+ au_writel(0x00, 0xb0200058); /* usbd_enable */
+ au_writel(0x00, 0xb4004104); /* mac dma */
+ au_writel(0x00, 0xb4004114); /* mac dma */
+ au_writel(0x00, 0xb4004124); /* mac dma */
+ au_writel(0x00, 0xb4004134); /* mac dma */
+ au_writel(0x00, 0xb1520000); /* macen0 */
+ au_writel(0x00, 0xb1520004); /* macen1 */
+ au_writel(0x00, 0xb1100100); /* uart0_enable */
+ au_writel(0x00, 0xb1200100); /* uart1_enable */
+ au_writel(0x00, 0xb1400100); /* uart3_enable */
+ au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
+ au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
+ au_writel(0x00, 0xb1900028); /* sys_clksrc */
+ au_writel(0x10, 0xb1900060); /* sys_cpupll */
+ au_writel(0x00, 0xb1900064); /* sys_auxpll */
+ au_writel(0x00, 0xb1900100); /* sys_pininputen */
+ break;
+ }
+
+ set_c0_status(ST0_BEV | ST0_ERL);
+ change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+ flush_cache_all();
+ write_c0_wired(0);
+
+ /* Give board a chance to do a hardware reset */
+ board_reset();
+
+ /* Jump to the beggining in case board_reset() is empty */
+ __asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
+}
+
+static void evalboard_halt(void)
+{
+#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
+ /* Power off system */
+ printk(KERN_NOTICE "\n** Powering off...\n");
+ au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
+ au_sync();
+ while (1)
+ ; /* should not get here */
+#else
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+#ifdef CONFIG_MIPS_MIRAGE
+ au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
+#endif
+#ifdef CONFIG_PM
+ au_sleep();
+
+ /* Should not get here */
+ printk(KERN_ERR "Unable to put CPU in sleep mode\n");
+ while (1)
+ ;
+#else
+ while (1)
+ __asm__(".set\tmips3\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+#endif
+#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
+}
+
+void __init evalboard_common_init(void)
+{
+ char *argptr;
+
+ argptr = prom_getcmdline();
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
+#ifdef CONFIG_FB_AU1100
+ argptr = strstr(argptr, "video=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ /* default panel */
+ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+ }
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+ /* au1000 does not support vra, au1500 and au1100 do */
+ strcat(argptr, " au1000_audio=vra");
+ argptr = prom_getcmdline();
+#endif
+
+ _machine_restart = evalboard_restart;
+ _machine_halt = evalboard_halt;
+ pm_power_off = evalboard_halt;
+}
diff --git a/arch/mips/alchemy/evalboards/db1x00.c b/arch/mips/alchemy/evalboards/db1x00.c
index 868ad3e..997c8a3 100644
--- a/arch/mips/alchemy/evalboards/db1x00.c
+++ b/arch/mips/alchemy/evalboards/db1x00.c
@@ -36,6 +36,8 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
+#include "common.h"
+
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
@@ -114,6 +116,8 @@ void __init board_setup(void)
pin_func = 0;
+ evalboard_common_init();
+
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
(defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
diff --git a/arch/mips/alchemy/evalboards/pb1000.c b/arch/mips/alchemy/evalboards/pb1000.c
index e795eaf..96354bf 100644
--- a/arch/mips/alchemy/evalboards/pb1000.c
+++ b/arch/mips/alchemy/evalboards/pb1000.c
@@ -28,6 +28,7 @@
#include <linux/kernel.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1000.h>
+#include "common.h"
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
@@ -52,6 +53,8 @@ void __init board_setup(void)
sys_freqctrl = sys_clksrc = 0;
+ evalboard_common_init();
+
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
diff --git a/arch/mips/alchemy/evalboards/pb1100.c b/arch/mips/alchemy/evalboards/pb1100.c
index dbd9605..3177deb 100644
--- a/arch/mips/alchemy/evalboards/pb1100.c
+++ b/arch/mips/alchemy/evalboards/pb1100.c
@@ -28,6 +28,7 @@
#include <linux/kernel.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1100.h>
+#include "common.h"
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
@@ -54,6 +55,8 @@ void __init board_setup(void)
{
volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
+ evalboard_common_init();
+
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PININPUTEN);
diff --git a/arch/mips/alchemy/evalboards/pb1200.c b/arch/mips/alchemy/evalboards/pb1200.c
index 4a24874..1ed54b5 100644
--- a/arch/mips/alchemy/evalboards/pb1200.c
+++ b/arch/mips/alchemy/evalboards/pb1200.c
@@ -39,6 +39,7 @@
#endif
#include <prom.h>
+#include "common.h"
extern void (*board_init_irq)(void);
@@ -184,6 +185,8 @@ void __init board_setup(void)
strcat(argptr, " video=au1200fb:panel:bs");
#endif
+ evalboard_common_init();
+
#if 0
{
u32 pin_func;
diff --git a/arch/mips/alchemy/evalboards/pb1500.c b/arch/mips/alchemy/evalboards/pb1500.c
index 72c5222..0187bc5 100644
--- a/arch/mips/alchemy/evalboards/pb1500.c
+++ b/arch/mips/alchemy/evalboards/pb1500.c
@@ -28,6 +28,7 @@
#include <linux/kernel.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1500.h>
+#include "common.h"
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
@@ -61,6 +62,8 @@ void __init board_setup(void)
u32 pin_func;
u32 sys_freqctrl, sys_clksrc;
+ evalboard_common_init();
+
sys_clksrc = sys_freqctrl = pin_func = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
diff --git a/arch/mips/alchemy/evalboards/pb1550.c b/arch/mips/alchemy/evalboards/pb1550.c
index 15bcf6b..f475791 100644
--- a/arch/mips/alchemy/evalboards/pb1550.c
+++ b/arch/mips/alchemy/evalboards/pb1550.c
@@ -31,6 +31,7 @@
#include <linux/kernel.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
+#include "common.h"
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
@@ -60,6 +61,8 @@ void __init board_setup(void)
{
u32 pin_func;
+ evalboard_common_init();
+
/*
* Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 2e26465..4712ce4 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -33,6 +33,7 @@
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/reboot.h>
#include <prom.h>
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
@@ -84,7 +85,7 @@ void __init prom_init(void)
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
-void board_reset(void)
+void board_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
@@ -122,6 +123,8 @@ void __init board_setup(void)
board_pci_idsel = mtx1_pci_idsel;
+ _machine_restart = board_reset;
+
printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 813668f..effb538 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -29,6 +29,7 @@
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/reboot.h>
#include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
@@ -74,7 +75,7 @@ void __init prom_init(void)
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
-void board_reset(void)
+void board_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
@@ -122,4 +123,6 @@ void __init board_setup(void)
au_writel(0xf, Au1500_PCI_CFG);
#endif
#endif
+
+ _machine_restart = board_reset;
}
--
1.6.0.3
