[PATCH] tx4938ide: Avoid underflow on calculation of a wait cycle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Make 'wt' variable signed while it can be negative during calculation.

Suggested-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
---
 drivers/ide/tx4938ide.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index 796289c..9120063 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -26,12 +26,13 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch,
 	unsigned int sp = (cr >> 4) & 3;
 	unsigned int clock = gbus_clock / (4 - sp);
 	unsigned int cycle = 1000000000 / clock;
-	unsigned int wt, shwt;
+	unsigned int shwt;
+	int wt;
 
 	/* Minimum DIOx- active time */
 	wt = DIV_ROUND_UP(t->act8b, cycle) - 2;
 	/* IORDY setup time: 35ns */
-	wt = max(wt, DIV_ROUND_UP(35, cycle));
+	wt = max_t(int, wt, DIV_ROUND_UP(35, cycle));
 	/* actual wait-cycle is max(wt & ~1, 1) */
 	if (wt > 2 && (wt & 1))
 		wt++;
-- 
1.5.6.3


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux