Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx> --- Here's the fragment I missed in the initial patch. Combine them if possible... arch/mips/au1000/pb1000/board_setup.c | 7 ------- 1 files changed, 7 deletions(-) Index: linux-2.6/arch/mips/au1000/pb1000/board_setup.c =================================================================== --- linux-2.6.orig/arch/mips/au1000/pb1000/board_setup.c +++ linux-2.6/arch/mips/au1000/pb1000/board_setup.c @@ -153,13 +153,6 @@ void __init board_setup(void) au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ -#ifdef CONFIG_PCI - au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0 - au_writel(0, SDRAM_MBAR); // set mbar to 0 - au_writel(0x2, SDRAM_CMD); // enable memory accesses - au_sync_delay(1); -#endif - /* Enable Au1000 BCLK switching - note: sed1356 must not use * its BCLK (Au1000 LCLK) for any timings */ switch (prid & 0x000000FF)
