pnx8xxx: move to clocksource

[Vitaly Wool <vitalywool@xxxxxxxxx>]

This patch converts PNX8XXX system timer to clocksource.

arch/mips/philips/pnx8550/common/time.c |  109 +++++++++++++++++++++-----------
1 files changed, 72 insertions(+), 37 deletions(-)

Signed-off-by: Vitaly Wool <vitalywool@xxxxxxxxx>

Index: linux-2.6/arch/mips/philips/pnx8550/common/time.c
===================================================================
--- linux-2.6.orig/arch/mips/philips/pnx8550/common/time.c
+++ linux-2.6/arch/mips/philips/pnx8550/common/time.c
@@ -22,7 +22,6 @@
#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
-#include <linux/module.h>

#include <asm/bootinfo.h>
#include <asm/cpu.h>
@@ -41,11 +40,60 @@ static cycle_t hpt_read(void)
	return read_c0_count2();
}

+static struct clocksource pnx_clocksource = {
+	.name		= "pnx8xxx",
+	.rating		= 200,
+	.read		= hpt_read,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
static void timer_ack(void)
{
	write_c0_compare(cpj);
}

+static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id)
+{
+        struct clock_event_device *c = dev_id;
+
+        /* clear MATCH, signal the event */
+        c->event_handler(c);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction pnx8xxx_timer_irq = {
+	.handler	= pnx8xxx_timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_PERCPU,
+	.name		= "pnx8xxx_timer",
+};
+
+static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
+{
+	/* Timer 2 clear interrupt */
+	write_c0_compare2(-1);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction monotonic_irqaction = {
+	.handler = monotonic_interrupt,
+	.flags = IRQF_DISABLED,
+	.name = "Monotonic timer",
+};
+
+static int pnx8xxx_set_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	write_c0_compare(delta);
+	return 0;
+}
+
+static struct clock_event_device pnx8xxx_clockevent = {
+	.name		= "pnx8xxx_clockevent",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = pnx8xxx_set_next_event,
+};
+
/*
 * plat_time_init() - it does the following things:
 *
@@ -58,11 +106,34 @@ static void timer_ack(void)

__init void plat_time_init(void)
{
+	unsigned int             configPR;
	unsigned int             n;
	unsigned int             m;
	unsigned int             p;
	unsigned int             pow2p;

+	clockevents_register_device(&pnx8xxx_clockevent);
+	clocksource_register(&pnx_clocksource);
+
+	setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq);
+	setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
+
+	/* Timer 1 start */
+	configPR = read_c0_config7();
+	configPR &= ~0x00000008;
+	write_c0_config7(configPR);
+
+	/* Timer 2 start */
+	configPR = read_c0_config7();
+	configPR &= ~0x00000010;
+	write_c0_config7(configPR);
+
+	/* Timer 3 stop */
+	configPR = read_c0_config7();
+	configPR |= 0x00000020;
+	write_c0_config7(configPR);
+
+
        /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
        /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1:  FIXME) */

@@ -87,42 +158,6 @@ __init void plat_time_init(void)
	write_c0_count2(0);
	write_c0_compare2(0xffffffff);

-	clocksource_mips.read = hpt_read;
-	mips_timer_ack = timer_ack;
-}
-
-static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
-{
-	/* Timer 2 clear interrupt */
-	write_c0_compare2(-1);
-	return IRQ_HANDLED;
}

-static struct irqaction monotonic_irqaction = {
-	.handler = monotonic_interrupt,
-	.flags = IRQF_DISABLED,
-	.name = "Monotonic timer",
-};

-void __init plat_timer_setup(struct irqaction *irq)
-{
-	int configPR;
-
-	setup_irq(PNX8550_INT_TIMER1, irq);
-	setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
-
-	/* Timer 1 start */
-	configPR = read_c0_config7();
-	configPR &= ~0x00000008;
-	write_c0_config7(configPR);
-
-	/* Timer 2 start */
-	configPR = read_c0_config7();
-	configPR &= ~0x00000010;
-	write_c0_config7(configPR);
-
-	/* Timer 3 stop */
-	configPR = read_c0_config7();
-	configPR |= 0x00000020;
-	write_c0_config7(configPR);
-}