Hello, Is this driver known to work with 64-bit kernels (specifically: 64-bit DMA addresses)? It sounds like that might be the problem. HTH, Mark > -----Original Message----- > From: Martin Michlmayr [mailto:tbm@xxxxxxxxxx] > Sent: Tuesday, February 28, 2006 2:13 PM > To: Mark E Mason > Cc: linux-mips@xxxxxxxxxxxxxx > Subject: Re: BCM91x80A/B PCI DMA problems > > * Mark E Mason <mark.e.mason@xxxxxxxxxxxx> [2006-02-28 13:53]: > > Is this a 32-bit, or 64-bit kernel? If 64-bit, do you have > more than > > 1G of DRAM installed in the system (DRAM above 1G is accessed at > > >32-bit physical addresses). > > Erm, I have 2 GB of RAM and used a 64-bit kernel. Using a > 32-bit kernel works. > > > Are you using CFE 1.2.5? The PCI interrupt assignments in earlier > > Yes. > > > versions of CFE were not correct. > -- > Martin Michlmayr > http://www.cyrius.com/ > >
