Re: BCM91x80A/B PCI DMA problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Mark E Mason <mark.e.mason@xxxxxxxxxxxx> [2006-02-28 13:53]:
> Is this a 32-bit, or 64-bit kernel?  If 64-bit, do you have more than 1G
> of DRAM installed in the system (DRAM above 1G is accessed at >32-bit
> physical addresses).

Erm, I have 2 GB of RAM and used a 64-bit kernel.  Using a 32-bit
kernel works.

> Are you using CFE 1.2.5?  The PCI interrupt assignments in earlier

Yes.

> versions of CFE were not correct.
-- 
Martin Michlmayr
http://www.cyrius.com/


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux