Hi > I'm trying to get USB working on my AU1550 board, and I'm getting an error I > don't understand. I've searched the web and the mailing list archives, but > haven't found anything relevant. Not the answer to you question, but I have some problems with USB on AU1200 board too. I use AirStar2 USB card (this is DVB-T card) and it is recognized by AU1200 and can communicate with it. I can tune to transporder, but the data (transport stream) is not send from the USB card. The card conforms to USB 1.1. I tried it on a PC running Linux and it works fine. AU1200 kernel: 2.6.11, PC kernel: 2.6.13.2. Any thoughts? BR, Matej P.S.: This is the log: ---------------------------------------------------------------------------------- flexcop_usb: running at FULL speed. DVB: registering new adapter (FlexCop Digital TV device). f010 b2c2-flexcop: MAC address = <DELETED> b2c2-flexcop: found the mt352 at i2c address: 0x0f DVB: registering frontend 0 (Zarlink MT352 DVB-T)... b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'USB' bus controlled by a 'FlexCopIII' complete creating 4 iso-urbs with 4 frames each of 1023 bytes size = 16368. initializing and submitting urb no. 0 (buf_offset: 0). urb no: 0, frame: 0, frame_offset: 0 urb no: 0, frame: 1, frame_offset: 1023 urb no: 0, frame: 2, frame_offset: 2046 urb no: 0, frame: 3, frame_offset: 3069 submitted urb no. 0. initializing and submitting urb no. 1 (buf_offset: 4092). urb no: 1, frame: 0, frame_offset: 0 urb no: 1, frame: 1, frame_offset: 1023 urb no: 1, frame: 2, frame_offset: 2046 urb no: 1, frame: 3, frame_offset: 3069 submitted urb no. 1. initializing and submitting urb no. 2 (buf_offset: 8184). urb no: 2, frame: 0, frame_offset: 0 urb no: 2, frame: 1, frame_offset: 1023 urb no: 2, frame: 2, frame_offset: 2046 urb no: 2, frame: 3, frame_offset: 3069 submitted urb no. 2. initializing and submitting urb no. 3 (buf_offset: 12276). urb no: 3, frame: 0, frame_offset: 0 urb no: 3, frame: 1, frame_offset: 1023 urb no: 3, frame: 2, frame_offset: 2046 urb no: 3, frame: 3, frame_offset: 3069 submitted urb no. 3. flexcop_usb: Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver successfully initialized and connected. usbcore: registered new driver b2c2_flexcop_usb ----------------------------------------------------------------------------------
