On Tue, 24 May 2005 00:54:47 +0900 (JST) Atsushi Nemoto <anemo@xxxxxxxxxxxxx> wrote: > >>>>> On Mon, 23 May 2005 18:45:01 +0400, Dmitriy Tochansky <toch@xxxxxxxxx> said: > > toch> Im enable cardbus yenta type in kernel config and see the > toch> follow: > > toch> yenta 0000:00:11.0: Preassigned resource 0 busy, reconfiguring... > toch> yenta 0000:00:11.0: Preassigned resource 1 busy, reconfiguring... > > I think these messages are due to confliction with resource management > codes in drivers/pci/setup-bus.c. Though I do not see details yet, > this quick workaround might solve this issue. > > --- linux-mips/drivers/pcmcia/yenta_socket.c 2005-04-18 00:43:34.000000000 +0900 > +++ linux/drivers/pcmcia/yenta_socket.c 2005-05-04 00:21:38.000000000 +0900 > @@ -611,10 +611,12 @@ Well, yes, the resourse problem "dissapear", but irq is still asking to report. I'll try to check setup-bus.c becourse IMHO there is problem in irq assignment or something. Yenta: CardBus bridge found at 0000:00:11.0 [e4bf:2000] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:11.0, mfunc 0x0fc01d02, devctl 0x66 drivers/pcmcia/ti113x.h pci_irq_status = 0 Yenta TI: socket 0000:00:11.0 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:00:11.0 falling back to parallel PCI interrupts Yenta TI: socket 0000:00:11.0 no PCI interrupts. Fish. Please report. CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc =c Oops in arch/mips/mm/fault.c::do_page_fault, line 167[#1]: -- Dmitriy Tochansky toch@xxxxxxxxx JID: dtoch@xxxxxxxxx
