Hi! Cant get where is the problem. Look. I have pci->pcmcia cardbus adaptor CP3-HOUSE and I want to start it on mips. Im enable cardbus yenta type in kernel config and see the follow: Yenta: CardBus bridge found at 0000:00:11.0 [e4bf:2000] yenta 0000:00:11.0: Preassigned resource 0 busy, reconfiguring... yenta 0000:00:11.0: Preassigned resource 1 busy, reconfiguring... Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:11.0, mfunc 0x0fc01d02, devctl 0x66 drivers/pcmcia/ti113x.h pci_irq_status = 0 Yenta TI: socket 0000:00:11.0 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:00:11.0 falling back to parallel PCI interrupts Yenta TI: socket 0000:00:11.0 no PCI interrupts. Fish. Please report. CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc =0 .... As far I understand driver cant get irq for this card but when I disable this driver I can see(via cat /proc/pci) that cardbus have irq 4... :( Ideas\advices are wellcome! -- Dmitriy Tochansky toch@xxxxxxxxx JID: dtoch@xxxxxxxxx
