On Tue, 21 Oct 2003, Jan-Benedict Glaw wrote: > I'm currently reworking the LK201 keyboard driver to attach it to the > new Input API, as well as letting it use the serio interface (-> this > way, you're not bound to dz.c/zs.c). Thanks for your effort and please cooperate -- I have some have half-baked patches for the driver to let it pass native codes for the raw mode as appropriate. > I've got a little problem with it, though. I've got docs (for the VAX) > which describe the LK201 in detail. First of all, the "Set LEDs On" > command is wrong there (advertised as 0x12, but 0x13 actually works; > this is what the current driver uses, too). That may be a typo, though.. This is definitely a typo -- 0x12 is a Set Mode command (mode: 1, key group: 2; a repeat register number follows). The definitions in lk201.h have been verified to be correct. > However, the "Set Mode" command (to set the repeat mode for a block of > keys) doesn't work for me on a lk201. Using a lk401 instead, these > commands work. Every time I send a set-mode command, I get a Input Error > (from the keyboard) sent back... Strange -- these work for me. > I'd like to ask you DECstation users to verify that the set-mode command > actually works for you on a lk201... Or do you all use the newer lk401? I have an LK201 and the current code was tested almost exclusively with it. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available +
