On Thu, 2002-01-10 at 10:48, Wolfgang Heidrich wrote: > Hello Pete, > > Pete Popov wrote: > > > > On Thu, 2002-01-10 at 09:40, Wolfgang Heidrich wrote: > > > Hello, > > > > > > > During booting the kernel initalizes the usb-device-driver and > > > a little later prints "USB device not accepting new address...": > > > > Which LSP version do you have? Do an "rpm -qa | grep hhl- | grep lsp". > > hhl-cross-mips_fp_le-lsp-mips-malta-2.4.2_hhl20-hhl2.0.2 > hhl-cross-mips_fp_le-lsp-alchemy-pb1000-2.4.2_hhl20-hhl2.0.2 That LSP is old. Get the _hhl20_hhl2.0.3 release. Alchemy should have it on their ftp site by now. Let me know if you still have problems with 2.0.3. Pete > > There was a hardware errata in the usb controller, but a software fix is > > already in the kernel (assuming you have a late enough kernel). Also, > > the usb switches, S4, should be set to: > > > > 1-4 off > > 5-6 on > > 7-8 off > > I used these settings. But as far as I know these settings are only > relevant for the second USB. > > Thanks in advance > -- > Wolfgang
