Hello Pete, Pete Popov wrote: > > On Thu, 2002-01-10 at 09:40, Wolfgang Heidrich wrote: > > Hello, > > > > During booting the kernel initalizes the usb-device-driver and > > a little later prints "USB device not accepting new address...": > > Which LSP version do you have? Do an "rpm -qa | grep hhl- | grep lsp". hhl-cross-mips_fp_le-lsp-mips-malta-2.4.2_hhl20-hhl2.0.2 hhl-cross-mips_fp_le-lsp-alchemy-pb1000-2.4.2_hhl20-hhl2.0.2 > > There was a hardware errata in the usb controller, but a software fix is > already in the kernel (assuming you have a late enough kernel). Also, > the usb switches, S4, should be set to: > > 1-4 off > 5-6 on > 7-8 off I used these settings. But as far as I know these settings are only relevant for the second USB. Thanks in advance -- Wolfgang
