Alice Hennessy wrote:
> Carsten Langgaard wrote:
>
> > This doesn't look right, you still need to enable the CU1 bit in the status register to let the FP
> > emulator kick-in.
> > FPU-less CPUs should take a coprocessor unusable exception on any floating-point instructions.
> > I have been running this on several FPU-less CPUs, and it works fine for me.
>
> Maybe the FPU-less CPUs you have been using define the CU1 bit as reserved
> or is unused (ignore on write, zero on read)? The TX3927 actually allows the setting of the CU1 bit.
> Have you seen
> a case where you need to set the CU1 bit for the emulation to kick-in? I would think that the CU1
> bit should
> never be set to one for FPU-less CPUs.
You are right, you don't need to set the CU1 bit for the emulator to kick-in (you just need a
coprocessor unusable exception), sorry my mistake.
So generally I think we should use the check against a FPU present (mips_cpu.options & MIPS_CPU_FPU),
instead of the TX39XX specific fix.
>
> Alice
>
> >
> >
> > Actually there is a problem with this code on CPUs, which have a FPU. The problem is that a lot of
> > CPUs have a CP0 hazard of 4 nops, between setting the CU1 bit in the status register and executing
> > the first floating point instruction thereafter. It probably only a performance issue, because if
> > the setting of CU1 hasn't taken effect yet, then we get a coprocessor unusable exception and the
> > the exception handler will also set the CU1 bit.
> >
> > /Carsten
> >
> > Atsushi Nemoto wrote:
> >
> > > >>>>> On Fri, 26 Oct 2001 22:58:06 +0900 (JST), Atsushi Nemoto <nemoto@toshiba-tops.co.jp> said:
> > > nemoto> I have seen TX39 dead on "cfc1" insturuction if STATUS.CU1 bit
> > > nemoto> enabled. Such codes were in arch/mips/kernel/process.c.
> > >
> > > So, please apply this patch to CVS for TX39XX support.
> > >
> > > I use CONFIG_CPU_TX39XX in this patch, but I suppose other FPU-less
> > > CPUs may need this also.
> > >
> > > Does anybody know how about on other CPUs?
> > >
> > > diff -u linux-sgi-cvs/arch/mips/kernel/process.c linux.new/arch/mips/kernel/
> > > --- linux-sgi-cvs/arch/mips/kernel/process.c Mon Oct 22 10:29:56 2001
> > > +++ linux.new/arch/mips/kernel/process.c Mon Oct 29 15:49:37 2001
> > > @@ -57,6 +57,12 @@
> > > {
> > > /* Forget lazy fpu state */
> > > if (last_task_used_math == current) {
> > > +#ifdef CONFIG_CPU_TX39XX
> > > + if (!(mips_cpu.options & MIPS_CPU_FPU)) {
> > > + last_task_used_math = NULL;
> > > + return;
> > > + }
> > > +#endif
> > > set_cp0_status(ST0_CU1);
> > > __asm__ __volatile__("cfc1\t$0,$31");
> > > last_task_used_math = NULL;
> > > @@ -67,6 +73,12 @@
> > > {
> > > /* Forget lazy fpu state */
> > > if (last_task_used_math == current) {
> > > +#ifdef CONFIG_CPU_TX39XX
> > > + if (!(mips_cpu.options & MIPS_CPU_FPU)) {
> > > + last_task_used_math = NULL;
> > > + return;
> > > + }
> > > +#endif
> > > set_cp0_status(ST0_CU1);
> > > __asm__ __volatile__("cfc1\t$0,$31");
> > > last_task_used_math = NULL;
> > > ---
> > > Atsushi Nemoto
> >
> > --
> > _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com
> > |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527
> > | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555
> > TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556
> > Denmark http://www.mips.com
--
_ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com
|\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527
| \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555
TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556
Denmark http://www.mips.com
