flashing the firmware image completely overwrites everything from the kernel-power package. just reflashing the kernel would have been sufficient if it was a kernel problem: flasher-3.5 -f --flash-only=kernel -R -F <firmware-image> but it seems that something else is the cause (broken home?). Modern Linux system don't need nor use a /lib/modules/current link. kernel-power fixes the broken /sbin/preinit so that it also uses "uname -r" to look up the correct modules. Therefore every kernel that is reflashed will find its own modules. On 18.06.10 13:42, Kimmo Hämäläinen wrote: >> Then it reboots, shows the flashing orange led. then the sequence of >> balls as normal. > > I guess. Haven't tried that. The problem could be that the kernel > modules are still for the power kernel version, so flashing the PR1.2 > kernel is not enough... If you can boot it in some way, you can fix the > symlink to point to the right kernel modules. > -- Thomas Tanner ------ email: tanner@xxxxxx GnuPG: 1024/5924D4DD _______________________________________________ maemo-users mailing list maemo-users@xxxxxxxxx https://lists.maemo.org/mailman/listinfo/maemo-users
