Hi there,
I recently bought a 1GB Kingston MMCmobile card which seems to work
great except for data-transfer between my n770 and my linux-pc. (I run
2.6.19-rc4-mm1, so very experimental stuff). I can't change my kernel
since I use a special variant of reiser4 which only works on this
kernel for /.
Badblocks doesn't report any bad blocks on the device even if I use it
with the write-option, however when copying files or stuff like that I
get the log attached at the end. I also inserted it into my
card-reader and there haven't been problems with this card so far.
It seems some apps trigger this failure more easily (e.g. copying many
mp3 files with kde) and others not (copying a 230mb video via cmd-line
cp)
Any ideas what could be wrong? Could this be caused by a weak cable?
Thank you in advance, lg Clemens
ohci_hcd 0000:00:03.0: wakeup
usb 2-1: new full speed USB device using ohci_hcd and address 7
usb 2-1: new device found, idVendor=0421, idProduct=0431
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Nokia 770
usb 2-1: Manufacturer: Nokia
usb 2-1: SerialNumber: 3230204F6374
usb 2-1: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 11:0:0:0: Direct-Access Nokia 770 0308 PQ: 0 ANSI: 2
SCSI device sda: 2038784 512-byte hdwr sectors (1044 MB)
sda: Write Protect is off
sda: Mode Sense: 0f 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 2038784 512-byte hdwr sectors (1044 MB)
sda: Write Protect is off
sda: Mode Sense: 0f 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 11:0:0:0: Attached scsi disk sda
sd 11:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
sd 11:0:0:0: SCSI error: return code = 0x08000002
sda: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x1f1b80
end_request: I/O error, dev sda, sector 2038656
Buffer I/O error on device sda, logical block 254832
sd 11:0:0:0: SCSI error: return code = 0x08000002
sda: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x1f1b80
end_request: I/O error, dev sda, sector 2038656
Buffer I/O error on device sda, logical block 254832
Reducing readahead size to 32K
