On 12/20/05, Ed Okerson <ed at okerson.com> wrote: > > On 12/14/05, Amit Kucheria <amit.kucheria at nokia.com> wrote: > >> On Tue, 2005-12-13 at 22:43 -0800, ext Dimitris Kogias wrote: > >> > Greetings, > >> > > >> > Kernel 2.6.14.3 from kernel.org, Debian sid with udev > >> > > >> > Following the instructions on: > >> > http://maemo.org/maemowiki/HOWTO_FlashLatestNokiaImageWithLinux > >> > >> Wiki page updated to add instructions on unplugging charger. See if this > >> helps. > > > > I've tried it exactly as per the instructions here and get the following > > output. > > > > [root at localhost nokia770]# ./flasher -F Nokia_770_0.2005.45-8.bin -f -R > > Found image 2nd (length 8576) > > Found image secondary (length 79360) > > Found image xloader (length 13824) > > Found image initfs (length 1567360) > > Found image kernel (length 1481728) > > Found image rootfs (length 57540608) > > USB device found found at bus 001, device address 011 > > Found board Nokia 770 (F5) > > NOLO version 0.9.0 > > Sending X-Loader image (13 kB)... > > Unable to send filler EOT > > usb_bulk_write: Broken pipe > > [root at localhost nokia770]# > > > > Any ideas? > > I have seen this when I was using the USB port on my laptop docking > station. The only solution was to undock the laptop and use the USB port > directly on the laptop. It can also happen if you are going through a USB > hub. That would be it then. Bugger as i don't think Linux supports undocking of my laptop (Dell D600) and hence have to reboot :-(
