After reading your answer more carefully I got the following idea:
How do you see if I boot the system (this is a desktop computer and the old and the new drive are both NVMe SSD) from USB Linux and then just do a 'dd' for the entire drive (in block level, bit-by-bit). Then I remove the old disk out of the system. Shouldn't it boot normally now ?
Then I will create a new partition for the all unused space (1.5GB) on new disk which I then will add to the LVM as a new Physical Volume (PV) in pc3_vg group. Then I just need to configure the Logical Volume to use that new added storage space.
If this is possible I think it would be a bit simpler way to do this.
What do you think about this method ?
How do you see if I boot the system (this is a desktop computer and the old and the new drive are both NVMe SSD) from USB Linux and then just do a 'dd' for the entire drive (in block level, bit-by-bit). Then I remove the old disk out of the system. Shouldn't it boot normally now ?
Then I will create a new partition for the all unused space (1.5GB) on new disk which I then will add to the LVM as a new Physical Volume (PV) in pc3_vg group. Then I just need to configure the Logical Volume to use that new added storage space.
If this is possible I think it would be a bit simpler way to do this.
What do you think about this method ?
ma 28. elok. 2023 klo 19.31 Roska Postit (roskapostit99999@xxxxxxxxx) kirjoitti:
Thank you very much for your time. This was very very helpful.ma 28. elok. 2023 klo 18.34 Stuart D Gathman (stuart@xxxxxxxxxxx) kirjoitti:On Sun, 27 Aug 2023, Roska Postit wrote:
> What is the most proper way to swap my 500GB SSD drive to the bigger 2TB SSD
> drive in the following LLVM configuration ?
>
> nvme0n1 259:0 0 465,8G 0 disk
> ├─nvme0n1p1 259:1 0 512M 0 part /boot/efi
> ├─nvme0n1p2 259:2 0 488M 0 part /boot
> └─nvme0n1p3 259:3 0 464,8G 0 part
> ├─pc3--vg-root 254:0 0 463,8G 0 lvm /
> └─pc3--vg-swap_1 254:1 0 980M 0 lvm [SWAP]
Since you are not mirroring, just add the new drive.
If this is a laptop, and you can only have one drive, then I suggest
you mount the new drive via USB (note there are at least 2 kinds of
nvme interface and you have to get a matching USB enclosure).
Use dd to copy the partition table (this also often contains boot code)
to the new disk on USB.
Then use dd to copy the smaller partitions (efi,boot).
Now use cfdisk to delete the 3rd partition.
Expand the boot partition to 1G (you'll thank me later).
Allocate the entire rest of the disk to p3.
Create a new vg with a different name. Allocate root and swap on
new VG the same sizes.
Take a snapshot of current root (delete swap on old drive since you
didn't leave yourself any room), and use partclone to efficiently
copy the filesystem over to new root.
Either a) edit grub and fstab on new drive to use new vg name or
b) boot from a live media to rename old and new vg or
c) rename vg just before shutting down to remove drive -
I think LVM can operate with dup VG name, but I've never
navigated the details.
Swap drives after powerdown.
A modern filesystem like ext2, xfs, btrfs, etc can expand as you expand
the root LV. Leave yourself some working room in the VG._______________________________________________
linux-lvm mailing list
linux-lvm@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
_______________________________________________ linux-lvm mailing list linux-lvm@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
