Re: Questions about monitoring, scrubbing & checking a LVM RAID5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 28, 2021 at 11:50:56PM +0200, Martin Dünkelmann wrote:
> Dear LVM2-People,
> 
> I made a native RAID5 via LVM on 3 SSDs without mdadm, since LVM2 can do it
> natively.
> 
> But I got confused about how to easily monitor it (send emails about errors,
> since it's a remove server) and how to check, repair and scrub the RAID5.
> 
> Using:
> "sudo lvchange --syncaction check cryptdata_raid5/home" (same for repair)
> results in
> 
> Command on LV cryptdata_raid5/home does not accept LV type linear.
> Command not permitted on LV cryptdata_raid5/home.

It works for me, so it could be a fixed bug.  Check that the LV is really
raid5: lvs -o segtype cryptdata_raid5/home

> Does that mean LVM2 doesn't fully support native RAID5 and I should format
> everything and set up a mdadm raid5?
> Because mdadm has scrubbing and email reports according to the mdadm.conf.

Right, mdadm does much more.

Dave

_______________________________________________
linux-lvm mailing list
linux-lvm@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/





[Index of Archives]     [Gluster Users]     [Kernel Development]     [Linux Clusters]     [Device Mapper]     [Security]     [Bugtraq]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]

  Powered by Linux