>>>>> "Annamalai" == Annamalai Gurusami <annamalai.gurusami@xxxxxxxxxx> writes: Annamalai> "John Stoffel" <john@xxxxxxxxxxx> writes: >> Looking at your 'lsblk' output, I suspect you can remove drive sda, >> the Seagate. So I'd probably try to shutdown cleanly, then remove >> that drive and boot up again. Annamalai> Finally I was able to spend sometime doing this. And you are correct. Annamalai> I shutdown the computer and removed the Seagate HDD and started the Annamalai> computer. Everything went smooth. Annamalai> Thanks for helping me. Great! Gald to help. Now what I would do is re-install the Seagte drive, boot up and then once you've identified it properly, I would wipe the beginning of the disk with: dd if=/dev/zero of=/dev/sd<letter> count=10000 where <letter> would *probably* be 'b' without quotes. But confirm! Then just reboot the system and you should see only the boot disk, along with a new blank disk. Then you can do what you want with it. John _______________________________________________ linux-lvm mailing list linux-lvm@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
