I am trying to create a new pv/vg/+lvs setup but am getting some weird messages pvcreate -M2 --pvmetadatacopies 2 /dev/sda1 Failed to clear hint file. WARNING: PV /dev/sdd1 in VG Backup is using an old PV header, modify the VG to update. Physical volume "/dev/sda1" successfully created. So why am I getting a message about not clearing a hint file (running s root) and how do I modify a VG that I don't want to make any modifications to? >From an online man page, I should have been able to use -ff to recreate a pv over the top of a preexisting one, but that didn't seem to work. I got: pvcreate -ff -M2 --pvmetadatacopies 2 /dev/sda1 Failed to clear hint file. WARNING: PV /dev/sdd1 in VG Backup is using an old PV header, modify the VG to update. Cannot access VG Space with system ID Ishtar with unknown local system ID. Device /dev/sda1 excluded by a filter. --- So it seems that is broken. I was able to work around that with: dd if=/dev/zero of=/dev/sda1 bs=4096 count=1 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000175409 s, 23.4 MB/s I also ran into a problem on how to tell vgcreate to use the whole pv. That was complicated by trying to specify my hostname as a system id: vgcreate -A y --alloc contiguous --systemid Ishtar --dataalignment 64KiB Space /dev/sda1 Failed to clear hint file. WARNING: PV /dev/sdd1 in VG Backup is using an old PV header, modify the VG to update. Volume group "Space" successfully created with system ID Ishtar vgs WARNING: PV /dev/sdd1 in VG Backup is using an old PV header, modify the VG to update. Cannot access VG Space with system ID Ishtar with unknown local system ID. VG #PV #LV #SN Attr VSize VFree Didn't know where the VG group ended up, which was why I needed to redo creating the pv (vgremove didn't work): vgremove Space Failed to clear hint file. Cannot access VG Space with system ID Ishtar with unknown local system ID. Cannot access VG Space with system ID Ishtar with unknown local system ID. Version info: pvcreate --version LVM version: 2.03.05(2) (2019-06-15) Library version: 1.03.01 (2019-06-15) Driver version: 4.42.0 Configuration: ./configure --host=x86_64-suse-linux-gnu --build=x86_64-suse-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --enable-dmeventd --enable-cmdlib --enable-udev_rules --enable-udev_sync --with-udev-prefix=/usr/ --enable-selinux --enable-pkgconfig --with-usrlibdir=/usr/lib64 --with-usrsbindir=/usr/sbin --with-default-dm-run-dir=/run --with-tmpfilesdir=/usr/lib/tmpfiles.d --with-thin=internal --with-device-gid=6 --with-device-mode=0640 --with-device-uid=0 --with-dmeventd-path=/usr/sbin/dmeventd --with-thin-check=/usr/sbin/thin_check --with-thin-dump=/usr/sbin/thin_dump --with-thin-repair=/usr/sbin/thin_repair --enable-blkid_wiping --enable-lvmpolld --enable-realtime --with-cache=internal --with-default-locking-dir=/run/lock/lvm --with-default-pid-dir=/run --with-default-run-dir=/run/lvm --enable-cmirrord --enable-fsadm --disable-silent-rules --enable-write_install --with-vdo=internal --with-vdo-format=/usr/bin/vdoformat Anyway -- why does it keep failing to clear the hint file? And how can I modify a VG without changing it (just to remove the annoying WARNING with every command). Thanks! _______________________________________________ linux-lvm mailing list linux-lvm@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
