LVM disk power management

["Drew..." <1drew345@gmail.com>]

Hi,
I have 3 physical disks forming one volume group, with one logical volume.
If i try to issue a standby command to the logical volume i get the following error..

sudo hdparm -y /dev/mapper/VG0-LVstorage

/dev/mapper/VG0-LVstorage:

 issuing standby command

 HDIO_DRIVE_CMD(standby) failed: Inappropriate ioctl for device

But if i issue a standby command to the individual disks in the volume group..

sudo hdparm -y /dev/sda1 /dev/sdb1 /dev/sdc1

/dev/sda1:

 issuing standby command

/dev/sdb1:

 issuing standby command

/dev/sdc1:

 issuing standby command

This works fine! 
Is addressing individual disks the normal way to to spin down disks in a lvm volume group or will this cause file corruption.

And if not, is there a safe way to achieve this or is it just not possible to spin down disks in a lvm.

I would be grateful of any advice you could offer. I have spent some time searching around for some information on this & i can not find any documented on this anywhere.

Thanks,

Kind regards,

Drew

_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/