On Tue, 25 Nov 2014 22:42:38 -0700
Chris Murphy <lists@colorremedies.com> wrote:
> On Mon, Nov 24, 2014 at 9:07 PM, Joe Lawrence <joe.lawrence@stratus.com> wrote:
> > Does anyone know how its possible to determine which side of an LVM RAID 1
> > is the stale partner during RAID resync?
> >
> > In ordinary MD RAID, I believe you can check
> > /sys/block/md0/md/dev-XXX/state, but LVM RAID seems to hide those files
> > when leveraging the MD code. I've looked though pvs/vgs/lvs manpages, but
> > can't figure anything out there either.
>
> Rather indirectly: iotop which will show you which devices are mostly
> being read from and written to.
>
> # lvs -a -o copy_percent
> Anything less than 100% is syncing. I think.
>
>From the manpages I see the following attribute bits:
* lvs, lv_attr bit Volume Health: (p)artial
* vgs, vg_attr bit (p)artial: one or more physical volumes belonging
to the volume group are missing from the system
* pvs, pv_attr bit (m)issing
along with the lvs copy_percent (is this similar to sync_percent) that
you mentioned. That's about it.
Since there seems to be no real underlying MD device, I'm assuming that
ioctls are out of the question as well.
-- Joe
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
