On Tue, 2010-08-17 at 15:26 -0400, Allen, Jack wrote: > I know pvmove is part ofLVM2, but because it worked with PowerPath and > not when using Multipath and all other things are the same is the > reason I am asking the questions here. we had similar problems with novell SLES every now and then, and they were not reproduceable and occured in random time frames. among them: - the pvmove simply stalled, outputting the same %-done message every 15 seconds until we reset the server. - the server crashed and performed an automated reboot. and worst: - pvmove immediately threw an I/O error after starting, committed all pending moves though -> all data previously residing on the old LUN was lost :( novell provided several updates to the kernel, lvm2 and the device-mapper, but there might still lurk some bugs we haven't triggered yet. one advise they gave us was to only migrate PEs of one LV at a time, which we followed afterwards. we've seen this behaviour only on SLES, which is the distribution we use on most of our servers. the few redhats we have migrated fine with pvmove, we didn't migrate much on these though (only some hundred GB compared to the ~50TB we had to migrate with SLES). and it was not related to the storage driver we used, we faced the same issues with HP's adapted qlogic driver as well as with dm-mp. anyway, you definitely should open an SR in redhat's CC, so they can investigate the issue more closely. hth, tom. -- Thomas "Duke" Hager duke@sigsegv.at GPG: 1024D/D27F858C http://www.sigsegv.at/gpg/duke.gpg ================================================================= "Never Underestimate the Power of Stupid People in Large Groups."
Attachment:
signature.asc
Description: This is a digitally signed message part
_______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
