Thanks so much! now it does work ok.
Best regards
Mariano
Mariano Gonzalvo wrote:
Hi,
I'm trying to configure lvm2 on top of drbd. I've configured drbd
(/dev/drbd0 and /dev/drbd1) and put them as primary node, but when I try
to create a physical volume this is what it does happens
pvcreate /dev/drbd0
Physical volume "/dev/drbd0" successfully created
pvdisplay
--- NEW Physical volume ---
PV Name /dev/md4
VG Name
PV Size 129,45 GB
Allocatable NO
PE Size (KByte) 0
Total PE 0
Free PE 0
Allocated PE 0
PV UUID MtxjHy-8zfW-i9nq-TJA4-b6F9-jtcW-FkanLB
/dev/md4 is the raid device over was configured drbd0.
Why /dev/md4 it's taken as PV Name?
It's trying to be helpful! Normally people build MD devices out of other devices
and so LVM uses the MD in preference to other devices it finds with the same UUID.
You'll need to exclude the MD device in the /etc/lvm/lvm.conf filters entry.
something like:
filter =[ "r/md4/" ]
|
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
