On Fri, 2006-11-10 at 09:27 -0600, Jonathan E Brassow wrote:
> I can't imagine putting LVM on a USB drive... Are you sure LVM is even
> involved here?
>
> You can type 'mount' or 'df' at the command prompt. That will tell you
> how the usbdisk is mounted. If it is mounted from /dev/sda1 - then
> there is no LVM in the mix.
>
> brassow
Jonathan,
Thanks for your reply.
I didn't know that an USB disk couldn't be used for logical volumes as
pvcreate and lvcreate did not complain.
However, when I now do a lvscan it gives me:
_______________________________________
[root@laguna ~]# lvscan
Couldn't find device with uuid
'G6vIxd-bp54-0zd0-PKzf-WI31-xPmr-qoeFAT'.
Couldn't find all physical volumes for volume group VolGroup00.
Couldn't find device with uuid
'G6vIxd-bp54-0zd0-PKzf-WI31-xPmr-qoeFAT'.
Couldn't find all physical volumes for volume group VolGroup00.
Volume group "VolGroup00" not found
ACTIVE '/dev/VolGroup01/LogVol00' [9.75 GB] inherit
ACTIVE '/dev/VolGroup01/LogVol02' [9.75 GB] inherit
ACTIVE '/dev/VolGroup01/LogVol03' [4.88 GB] inherit
ACTIVE '/dev/VolGroup01/LogVol04' [9.75 GB] inherit
ACTIVE '/dev/VolGroup01/LogVol05' [9.75 GB] inherit
ACTIVE '/dev/VolGroup01/LogVol01' [9.75 GB] inherit
_________________________________________________________________
As VolGroup00 is on the USB disk which I just had connected.
df gives:
_____________________________________
/dev/mapper/VolGroup01-LogVol00
9903432 1035860 8356392 12% /
/dev/hda1 99043 25640 68289 28% /boot
tmpfs 512492 0 512492 0% /dev/shm
/dev/mapper/VolGroup01-LogVol02
9903432 1789628 7602624 20% /home
/dev/mapper/VolGroup01-LogVol03
4951688 4137648 558452 89% /usr
/dev/mapper/VolGroup01-LogVol04
9903432 342224 9050028 4% /usr/local
/dev/mapper/VolGroup01-LogVol05
9903432 761312 8630940 9% /var
/dev/sda1 240362656 38037368 190115488 17% /media/disk
___________________________________________________
and fdisk says:
_____________________________________________________
The number of cylinders for this disk is set to 30400.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by
w(rite)
Command (m for help): p
Disk /dev/sda1: 250.0 GB, 250056705024 bytes
255 heads, 63 sectors/track, 30400 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Command (m for help): q
______________________________________
So I'm at a loss how this is possible. The disk can be reached but
neither lvm nor fdisk can tell me what's on the disk,
Can you perhaps shine some light on it?
(sorry for the long mail).
Joep
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
