What concerns me is if I just try and make a single 4.54TB partition as
reiserfs without using LVM2 and mount it, it still only shows up as
~560GB using df -h. This makes me think it maybe an os issue. Any
thoughts?
Barnaby Claydon wrote:
Dan wrote:
I have 24 - 500GB drives raided such that 11 drives + 1 hot spare per
raid to get 4.54TB times 2. I want to use LVM2 to make this into one
~9TB disk, but when I create the partitions and do a df -h they show
up as about 560GB each instead of 4.5TB each. I do an fdisk -l and
they show up correctly. I am using Slackware 10.0. I have
device-mapper and LVM2 correctly installed. I am obviously hitting a
2TB limit from what I have read, but does anyone know if it is
possible to even do what I want? If so, any suggestions on what I
need to install to get this to work? I am running the 2.6.15.4
kernel. Thanks
Dan, from the LVM2 FAQ (
http://www.tldp.org/HOWTO/LVM-HOWTO/lvm2faq.html ) it mentions:
* For 32-bit CPUs on 2.6 kernels, the maximum LV size is 16TB.
* For 64-bit CPUs on 2.6 kernels, the maximum LV size is 8EB. (Yes,
that is a very large number.)
From what I recall when I built my last LVM, it's a matter of setting
the PE size during creation (hopefully you haven't started filling
with data yet). I think the default causes you to hit the 2TB limit,
but it can definitely be set higher. The default PE Size seems to
depend on Linux distribution, but mine is at 4MB and I'm at 1.5TB
right now so the references to a 32MB default would definitely get you
to 9TB.
Sorry I can't offer any other specifics - hope that helps.
-Barnaby
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
