Hi
all,
When I installed my first FC3 server about a year ago, I used the automatic
partitioning option. As a result my root and swap partition are now managed by
LVM. All works fine, but I want to make images with PartImage
which doesn't recognize the volumes.
Is there a way to make at least my root partition a standard ext3 partition
again?
Below I have given some disk information (i hope it
will be helpful)
Bye,
Joost.
[root@server-dc1 ~]# cat /etc/fstab
# This file is edited by fstab-sync
- see 'man fstab-sync' for details
/dev/hda3 /home ext3 defaults 1 1
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
/dev/VolGroup00/LogVol01 swap swap defaults 0 0
/dev/sda1 /home/samba/backup ext3 defaults 1 2
/dev/hdc /media/cdrecorder
auto pamconsole,exec,noauto,managed
0 0
/dev/fd0 /media/floppy auto pamconsole,exec,noauto,managed
0 0
[root@server-dc1 ~]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
37285432 4133568 31257876 12% /
/dev/hda3 119101296 41825380 71225840 37% /home
/dev/hda1 101086 15511 80356 17% /boot
none 383400 0 383400 0% /dev/shm
/dev/sda1 240362656 179831788 48321068 79% /home/samba/backup
lvm> vgscan
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
lvm> lvmdiskscan
/dev/hda [ 152.67 GB]
/dev/sda [ 232.89 GB]
/dev/hda1 [ 101.94 MB]
/dev/sda1 [ 232.88 GB]
/dev/hda2 [ 37.17 GB] LVM physical volume
/dev/hda3 [ 115.40 GB]
2 disks
3 partitions
0 LVM physical volume whole disks
1 LVM physical volume
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.3.0/290 - Release Date: 23-3-2006
|
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
