I had to solve a similar problem lastly. For me, there is some more complicated stuff to get rid of. We are using SRDF mirroring. This leads to seeing the same disk_content_ on a different physical disk. This disk is readonly. LVM1 searches all disks in descending order and uses the readonly instead of the writeable copy. To find out which disk is which LUN, you can use scsi_info from the kernel-pcmcia-cs-3.1.31-9 RPM. Of course this is only valid for RH. I solved the problem by vgscanning the SAN from initrd. On the ramdisk image, I included the device files for the devices to scan only. The Emulex SAN driver I use creates scsi devices sorted by Symmetrix, then LUN. So, the first 4 devices are on Symmetrix-A, starting from 0-0-0, followed by the devices on Symmetrix-B, starting form 0-0-0. I recommend to use static bindings, not only to change the device's order. The RedHat functions create all devicenodes on the initrd. So, scanning has to take place before it starts doing so. Afterwards I copy the lvmtab to the mounted real-root-device, overwriting the last active fileset. I have set up a HA cluster. Scanning the LVMs at bootup is vital for me. If you are not in need for updating the lvmtab frequently, you can do vgscans manually. You will have to remove the unneeded devicenodes before doing so. With LVM2, you can specify limits for vgscan. If the QLogic driver works in a similar way, this may be handy. BTW: you do failover within the driver? I tried to do so, but up to now I failed. Can you tell me more about how the QLogic driver can be configured to failover? This is a bit off topic. Could you reply to this question by using my real address? Good luck Thomas Shan Jing wrote: > > The very basic way to identify the pair is to lvm each of the first 22 luns in a sequence and see which lun in the other 22 set is also lvm'ed. > > However, there must be a more technical way to resolve this and eventually make the disk represent only once. Any guru out there can help? > > Regards, > Shan Jing > > Unix Group - Americas > Deutsche Bank > 2 Gatehall Drive, 3rd Floor > Parsippany, New Jersey, USA > shan.jing@db.com > 973.682.3463 > > _______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
