Hi I am new to the list, but I went through the archives and find some ideas but not an approbiate answer ... I want to make a snapshot of a mounted logical volume, which is formated with ReiserFS v3.6. My configuration: Compaq DL580 with SmartArray 5300 controller with Storage Enclosure 4312R attached, 12 disks + 2 disks for system SuSE Enterprise Server 8 (United Linux 1.0) with kernel 2.4.19-4GB, lvm 1.0.7 I have created six volume groups, consisting of two physical disks each; each volume group (36 GB large) contains two logical volumes, each 10 GB. The groups and volumes are labeled as volgrp01, lv01vg01, lv02vg01 (volume group 01, logical volume 01 on volume group 01 ...) volgrp02, lv01vg02, lv02vg02 volgrp03, lv01vg03, lv02vg03 I have mounted lv01vg01 to /data_1 and I have created an empty file with dd if=/dev/zero of=/data_1/testfile.raw bs=1M count=4000, then I followed documentation and did a lvcreate -L 11000M -s -n snaplv01vg01 /dev/volgrp01/lv01vg01. All I can see is harddisk activity, but the command prompt did not return (I have been waiting for 2 hours), so I turned on verbose mode and last message is "locking lvm" (something like that) and then I have been waiting again. What's the problem, mistake? Thanks, Dietmar _______________________________________________ linux-lvm mailing list linux-lvm@sistina.com http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
