mfusco@calpoly.edu wrote: > > Need help please! Maybe you should ask a software raid mailing list, and not the LVM mailing list. > Here is my current system. > /boot is a md0 raid1 mirrored over 4 scsi disk, host0 target9, h0t10, h1t9, > h1t10. > / is a md11 raid1 mirrored over the same four disks. > md0 is part1 and md11 is part2 > my lilo has the option for raid-????-boot=mbr-only and LILO does load the > kernel. i always mark the /boot partition bootable on all disks, and use the default mbr or the one that in debian comes from the install-mbr command In lilo.conf i write boot=/dev/mdX And it works so far. > heres the problem. raidautostart /dev/md0 failed kernel unable to mount > root directory 09:00. I have tried to make a initrd with --preload raid1 and - > -with=raid1 but still no luck. also unzip my initrd and looked in the /dev > only entry was md0 which was a symbolic link to md/0. Tried to mknod the > files, sda, sdb... sda1, sda2, ... and md0, md11 and still no luck? Did you change the partition types to linux raid autodetect ? (is that "fd" or is "fd" LVM ?) > Please any ides would be really helpful read the linux software raid howto JonB _______________________________________________ linux-lvm mailing list linux-lvm@sistina.com http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
