Hi erveryone! I'm a little bit closer now. I've create an initrd with lvmcreate_initrd. In this initrd there was no module for my mylex-raid-controller. I've fixed that problem, e.g. put the kernel module in it and changed linuxrc. After rebooting there's another kernel panic, but on this time the system finds my volume groups. Output: kernel panic: no init found. Try passing init= to... This is a little bit strange. I checked the initrd another time and in the ramdisk-bin-dir there's the bash and sh. A little help would be nice! Greetings Stefan Weigel P.S.: I'm using SLES7.2 with the standard-packages. > Hi! > I'm trying to get lvm on my root-fs working. But there's is an kernel-panic > error. Some details: > > > - system with Mylex RAID-controller (DAC960). It's included in the initrd. > > > - root-partition is /dev/rd/c0d0p1 > > > I used the HowTo from sistina.com, copied the files from /dev/rd/c0d0p1 to > /dev/sysvg/rootlv, edited the /etc/fstab pointing to the new partition > /dev/sysvg/rootlv. > I made a reboot and everything worked fine. But in /etc/lilo.conf there's > the > entry root=/dev/rd/c0d0p1. I changed this entry to /dev/sysvg/rootlv. Then I > run lilo. After another reboot I got the kernel panic. > The initrd is IMO working. But when I change the "root=" entry in > /etc/lilo.conf a kernel panic occurs. > Can anybody help me ?? > > > Best regards > > > Stefan Weigel _______________________________________________ linux-lvm mailing list linux-lvm@sistina.com http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
