On Tue, Sep 10, 2002 at 09:12:31AM -0400, Scott Savarese wrote:
>> which would tell lilo to put its boot sector at the beginning of hdc1
>> and its mirrored copy.
>
>I made the change but the black magic isn't working...I am getting L 80
>80... again.
>
L 80 means that LILO loaded the boot sector, but a disk not ready error
prevented it from finding the second stage boot loader (/boot/boot.b)
looks like it is looking on the wrong drive...
are you 100% positive that you have replaced lilo with a standard dos
mbr on hdc?
another option is to use:
disk = /dev/hdc
bios = 0x80
boot = /dev/hdc
in your lilo.conf, but this does not work seamlessly with raid
and you need two lilo.conf (one for hda and one for hdc)
L.
--
Luca Berra -- bluca@comedia.it
Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
X AGAINST HTML MAIL
/ \
_______________________________________________
linux-lvm mailing list
linux-lvm@sistina.com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
