> /dev/md0 and /dev/md1 on my second hard drive telling it that my first > harddrive was failed (so it wouldn't use it and break it). The first > will hold my /boot and the second (for now) will hold my /. I then > installed LVM onto my /dev/md1 and copied the filesystems over to the > appropriate locations. However after I configure lilo and fstab I have > issues. Depending on my lilo.conf I get either > L 80 80 80 ... > or > LI You will save yourself a lot of trouble if you stick with hardware raid for the boot volume (i.e., the bios only sees a single device) and avoid LVM altogeter for the root volume (assuming you put /boot on /). Main reason is that if anything does go wrong with LVM it's a pain to fix without LVM. Until the X86 BIOS gets brains (and pigs floss...) just use a simple partition for the root voume and perhaps a second partition with a stand-alone rescue system on the other drive. If you install LVM into the root volume (e.g., /lvm) then yuo can at least boot single-user and fix things. -- Steven Lembark 2930 W. Palmer Workhorse Computing Chicago, IL 60647 +1 800 762 1582 _______________________________________________ linux-lvm mailing list linux-lvm@sistina.com http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html