Hi all,
I have a 150 Gig LVM array. I was in the process of getting ready to
upgrade from Slack 8.0 to 8.1. I started vgexport on the vg "archive", but
before it finished, the power blinked and my UPS didnt catch it in time. The
server rebooted. All LVM tools, including uufix, now think that they are 2
diffrent incomplete VGs, one exported and one " associated to an unknown
VG". How do I remedy this? Following are the output of some LVM progs.
I apreciate any help,
Fred Dinkler IV
pvscan -- reading all physical volumes (this may take a while...)
pvscan -- inactive PV "/dev/hdk1" is associated to an unknown VG (run
vgscan)
pvscan -- inactive PV "/dev/hdl1" is associated to an unknown VG (run
vgscan)
pvscan -- inactive PV "/dev/hdi1" is in EXPORTED VG "archive" [28.62 GB / 0
free]
pvscan -- inactive PV "/dev/hdj1" is in EXPORTED VG "archive" [37.29 GB / 0
free]
pvscan -- inactive PV "/dev/hde1" is associated to an unknown VG (run
vgscan)
pvscan -- total: 5 [149.79 GB] / in use: 5 [149.79 GB] / in no VG: 0 [0]
vgexport archive
vgexport -- volume group "archive" doesn't exist
vgimport archive /dev/hdk1 /dev/hdl1 /dev/hdi1 /dev/hdj1 /dev/hde1
vgimport -- ERROR: physical volume "/dev/hdk1" doesn't belong to an exported
volume group
./uuid_fixer /dev/hdk1 /dev/hdl1 /dev/hdi1 /dev/hdj1 /dev/hde1 Error: PV
/dev/hdi1 does not belong to /dev/hdk1's VG
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
_______________________________________________
linux-lvm mailing list
linux-lvm@sistina.com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
