On Fri, May 24, 2002 at 02:32:19PM -0700, bo wrote: > Heinz, > > I verified these two issues as commented below; > > > > > > > > A 'workaround' for non-devfs configurations is > > > > > > > > ls /dev/*/group | sed 's!/group!!' | xargs rm -r ; vgmknodes > > > > > > > > > > ??Something wrong on "sed 's!/group!!' ", it did not work. > > > > Works fine here. Maybe your sed doesn't like the delimiter? > > > > Try '/' rather than '!' with sed like "sed 's/\/group//'". > > > > worked w/o delimiters like > > ls /dev/*/group | sed 's/group//' | xargs rm -r ; vgmknodes Yes, trailing / doesn't matter in the rm args :) > > > > > > > > > > > > link the single executable statically by running > > > > "./configure --enable-static_link" (which doesn't use the shared > libs). > > > > > > > > > > It did not work. I rebuilt LINUX kernel & LVM after > > > "./configure --enable-static_link". > > > I got the same result. > > > > Did you start with a fresh source tree or run "make distclean" > > before "./configure --enable-static_link"? > > > > > > > Yes, worked with "make distclean". Good. > > For the backward compatibilty I will try later. OK. > > One more question related with activating PV, > > Of course I could make them active after removing the volume and recreating > it. > As you can notice on the attached log VG is ok, How could I make these PVs > active > w/o removing the volume? > > Did it corrupt the VGDA? any way to recover it? See below. > (PS: you can notice TWO "volDisk" group in the following "vgdisplay", should > be > volDisk & volDisk2 ???) You still seem to have wrong /dev/ entries :-( Maybe because of earlier problems, 2 VGs (volDisk and volDisk2) now have the same internal number? Please send the output of "pvdata -a /dev/hd[cd]9 /dev/hda15 /dev/hd[cd]10 /dev/hda16 ; ls -lR /dev" directly to me (mge@sistina.com). If volDisk and VolDisk2 have the same internal numbers, we can try "vgscan -f" which comes with LVM >= 1.0.3. Regards, Heinz -- The LVM Guy -- > > Thanks again, > > Bo > ---------------------------------------------------------------------------- > ----------------- > [root@localhost /root]# pvscan > pvscan -- reading all physical volumes (this may take a while...) > pvscan -- ACTIVE PV "/dev/md0" of VG "volRaid0" [1.95 GB / 0 free] > pvscan -- ACTIVE PV "/dev/md1" of VG "volRaid0" [1.95 GB / 0 free] > pvscan -- ACTIVE PV "/dev/md2" of VG "volRaid0" [1.95 GB / 0 free] > pvscan -- ACTIVE PV "/dev/md3" of VG "volRaid1" [992 MB / 0 free] > pvscan -- ACTIVE PV "/dev/md4" of VG "volRaid1" [992 MB / 484 MB free] > pvscan -- ACTIVE PV "/dev/md5" of VG "volRaid5" [1.95 GB / 992 MB free] > pvscan -- ACTIVE PV "/dev/md6" of VG "volRaid5" [1.95 GB / 1.95 GB free] > pvscan -- ACTIVE PV "/dev/hdc9" of VG "volDisk" [992 MB / 992 MB free] > pvscan -- inactive PV "/dev/hdc10" of VG "volDisk2" [992 MB / 788 MB free] > pvscan -- ACTIVE PV "/dev/hdd9" of VG "volDisk" [992 MB / 992 MB free] > pvscan -- inactive PV "/dev/hdd10" of VG "volDisk2" [992 MB / 792 MB free] > pvscan -- ACTIVE PV "/dev/hda15" of VG "volDisk" [996 MB / 996 MB free] > pvscan -- inactive PV "/dev/hda16" of VG "volDisk2" [996 MB / 0 free] > pvscan -- total: 13 [17.59 GB] / in use: 13 [17.59 GB] / in no VG: 0 [0] > > [root@localhost /root]# pvdisplay /dev/hdc10 > --- Physical volume --- > PV Name /dev/hdc10 > VG Name volDisk2 > PV Size 1000.09 MB [2048193 secs] / NOT usable 4.19 MB [LVM: > 128 KB] > PV# 2 > PV Status available > Allocatable yes > Cur LV 2 > PE Size (KByte) 4096 > Total PE 248 > Free PE 197 > Allocated PE 51 > PV UUID b5ybET-1zOq-HPnP-QQda-zjgQ-5avz-aGFMav > > [root@localhost /root]# vgdisplay > --- Volume group --- > VG Name volDisk > VG Access read/write > VG Status available/resizable > VG # 1 > MAX LV 256 > Cur LV 0 > Open LV 0 > MAX LV Size 255.99 GB > Max PV 256 > Cur PV 3 > Act PV 3 > VG Size 2.91 GB > PE Size 4 MB > Total PE 745 > Alloc PE / Size 0 / 0 > Free PE / Size 745 / 2.91 GB > VG UUID 7RhXUS-Pw5B-EBYN-GKIM-PO1d-4uD7-4apSvp > > --- Volume group --- > VG Name volDisk > VG Access read/write > VG Status available/resizable > VG # 1 > MAX LV 256 > Cur LV 0 > Open LV 0 > MAX LV Size 255.99 GB > Max PV 256 > Cur PV 3 > Act PV 3 > VG Size 2.91 GB > PE Size 4 MB > Total PE 745 > Alloc PE / Size 0 / 0 > Free PE / Size 745 / 2.91 GB > VG UUID 7RhXUS-Pw5B-EBYN-GKIM-PO1d-4uD7-4apSvp > > > > > > _______________________________________________ > linux-lvm mailing list > linux-lvm@sistina.com > http://lists.sistina.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html *** Software bugs are stupid. Nevertheless it needs not so stupid people to solve them *** =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Heinz Mauelshagen Sistina Software Inc. Senior Consultant/Developer Am Sonnenhang 11 56242 Marienrachdorf Germany Mauelshagen@Sistina.com +49 2626 141200 FAX 924446 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- _______________________________________________ linux-lvm mailing list linux-lvm@sistina.com http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
