Heinz,
> A 'workaround' for non-devfs configurations is
>
> ls /dev/*/group | sed 's!/group!!' | xargs rm -r ; vgmknodes
>
??Something wrong on "sed 's!/group!!' ", it did not work.
>
> link the single executable statically by running
> "./configure --enable-static_link" (which doesn't use the shared libs).
>
It did not work. I rebuilt LINUX kernel & LVM after
"./configure --enable-static_link".
I got the same result.
Another big issues came as follow;
I tried to go back to LVM1.0.3, but getting a big trouble.
Q1: Is it backward compatible from LVM1.1-rc2 to LVM1.0.3 or not?
I already built the volume from LVM1.1-rc2 then I went back to
LVM1.0.3.
All of LVM tools are not working as shown in the following console
output.
Q2: How could I remove this volume and rebuild? I do not care about the
data.
During boot or after the boot, I have the following errors;
[root@localhost /]# vgscan -f
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- found inactive volume group "volRaid0"
vgscan -- ERROR "lv_check_consistency(): LV status" volume group "volRaid0"
is inconsistent
vgscan -- ERROR: unable to do a backup of volume group "volRaid0"
vgscan -- ERROR "lvm_tab_vg_remove(): unlink" removing volume group
"volRaid0" from "/etc/lvmtab"
vgscan -- found inactive volume group "volRaid5"
vgscan -- ERROR "lv_check_consistency(): LV status" volume group "volRaid5"
is inconsistent
vgscan -- ERROR: unable to do a backup of volume group "volRaid5"
vgscan -- ERROR "lvm_tab_vg_remove(): unlink" removing volume group
"volRaid5" from "/etc/lvmtab"
vgscan -- found inactive volume group "volDisk"
vgscan -- ERROR "lv_check_consistency(): LV status" volume group "volDisk"
is inconsistent
vgscan -- ERROR: unable to do a backup of volume group "volDisk"
vgscan -- ERROR "lvm_tab_vg_remove(): unlink" removing volume group
"volDisk" from "/etc/lvmtab"
vgscan -- found inactive volume group "volDisk2"
vgscan -- ERROR "lv_check_consistency(): LV status" volume group "volDisk2"
is inconsistent
vgscan -- ERROR: unable to do a backup of volume group "volDisk2"
vgscan -- ERROR "lvm_tab_vg_remove(): unlink" removing volume group
"volDisk2" from "/etc/lvmtab"
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume
groups
[root@localhost /root]# ls /dev/*/group
ls: /dev/*/group: No such file or directory
[root@localhost /root]# vgmknodes
vgmknodes -- no volume groups found to create nodes for
Thanks for your help,
Bo
_______________________________________________
linux-lvm mailing list
linux-lvm@sistina.com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
