Well, you hit the cast problem I reported a fix for on linux-lvm shortly after the LVM 1.0.3 release. Sorry for the inconvenience! Here's the patch again. Regards, Heinz -- The LVM Guy -- diff -u -B -r1.43 -r1.44 --- LVM/tools/lib/liblvm.h 18 Feb 2002 16:37:18 -0000 1.43 +++ LVM/tools/lib/liblvm.h 20 Feb 2002 10:49:14 -0000 1.44 @@ -93,10 +93,10 @@ #include <time.h> #include <limits.h> #ifdef _G_LSEEK64 -int lseek64 ( unsigned int, unsigned long long, unsigned int); +loff_t lseek64 ( int, loff_t, int); #define llseek lseek64 #else -int llseek ( unsigned int, unsigned long long, unsigned int); +loff_t llseek ( int, loff_t, int); #endif #include <sys/ioctl.h> @@ -130,7 +130,7 @@ #define LVMTAB "/etc/lvmtab" /* LVM table of VGs */ #define LVMTAB_DIR "/etc/lvmtab.d" /* storage dir VG data */ #define LVMTAB_MINSIZE ( sizeof ( vg_t) + sizeof ( lv_t) + sizeof ( pv_t)) -#define LVM_DEV "/dev/lvm" +#define LVM_DEV LVM_DIR_PREFIX "lvm" #define VG_BACKUP_DIR "/etc/lvmconf" #define DISK_NAME_LEN 8 #define LV_MIN_NAME_LEN 5 On Wed, Mar 06, 2002 at 01:05:53AM +0100, Denie Andriessen wrote: > Hi, > > So, I've updated my lvm tools from 0.9.1-beta2 to 1.0.3., and now I seem to > have ran into quite some problems.. > > Ran all test of the move again, and after a few faultless flows I started > off again.. > We have a volume with 4 * 60, 2 * 80 disk, and another volume (new one, new > disk) with 120Gb. > > I'd like to move one 60Gb disk to the volume with the 120 Gb disk. > > E2fsran nicely, then I started with a PV move, to get /dev/hdc1 out (after > failing the first time I tries also to move /dev/hdb1 out) both failing at > the same point, that is with 127 PE's moved... > > Any takers ? > > Regards, > ------- info----------- > pvmove -- writing physical extent part of VGDA on destination "/dev/hdg1" > lv: /dev/volume/data[1] old_dev: 22:01 new_dev: 34:01 old_pe_sector: > 4176642 new_pe_sector: 47036865 > pvmove -- opening output physical volume "/dev/hdg1" > pvmove -- llseeking input physical volume "/dev/hdc1" > pvmove -- llseeking output physical volume "/dev/hdg1" > pvmove -- /dev/hdc1 [PE 127 [data [LE 7328]] -> /dev/hdg1 [PE 1435] > [128/3577] > pvmove -- locking physical extent 127 of "/dev/hdc1" in kernel > pvmove -- about to read input physical volume "/dev/hdc1" and to write > output physical volume "/dev/hdg1" > pvmove -- ERROR reading input physical volume "/dev/hdc1" (still 7733248 > bytes to read) > pvmove -- ERROR "pv_move_pe(): read input PV" moving physical extents > > [root@localhost /]# lvscan > lvscan -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run > vgscan > > [root@localhost /]# vgscan > vgscan -- reading all physical volumes (this may take a while...) > vgscan -- found active volume group "volume" > vgscan -- only found 20391 of 20518 LEs for LV /dev/volume/data (0) > vgscan -- ERROR "vg_read_with_pv_and_lv(): allocated LE of LV" can't get > data of volume group "volume" from physical volume(s) > vgscan -- found active volume group "mp3volume" > vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created > vgscan -- WARNING: This program does not do a VGDA backup of your volume > groups > > [root@localhost /]# lvscan > lvscan -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run > vgscan > > [root@localhost /]# vgdisplay > vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run > vgscan > > [root@localhost /]# vgdisplay -v volume > vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run > vgscan > > > > _______________________________________________ > linux-lvm mailing list > linux-lvm@sistina.com > http://lists.sistina.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html *** Software bugs are stupid. Nevertheless it needs not so stupid people to solve them *** =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Heinz Mauelshagen Sistina Software Inc. Senior Consultant/Developer Am Sonnenhang 11 56242 Marienrachdorf Germany Mauelshagen@Sistina.com +49 2626 141200 FAX 924446 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- _______________________________________________ linux-lvm mailing list linux-lvm@sistina.com http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
