le lun 11-02-2002 à 19:49, linux-lvm-request@sistina.com a écrit : > My problem is on boot of the machine I get a error from the mount > process that it can not mount and check my file system > "/dev/vg01/vg01lv01" and a option to go into singe user mode where I can > se that the "vgchange -a y" is not run to activate > the volume group. I have looked at the rc.sysinit and there is this > entry that should activate all defined volume groups. > Have any of you out in cyberspace seen the same problem with Redhat 7.2 ? > > cut from the /etc/rc.d/rc.sysinit : > > # LVM initialization > if [ -e /proc/lvm -a -x /sbin/vgchange -a -f /etc/lvmtab ]; then > action $"Setting up Logical Volume Management:" /sbin/vgscan && > /sbin/vgchange -a y > fi > > My setup : > > HP Omnibook 6000 laptop > Redhat 7.2 > I have installed the "new" 2.4.17 Linux kernel > VLM support works (That is I can create lv's and I use ext3 file system > on them) > I have added my lvm to fstab and are able to mount/umount the file > system without problems > > cut from fstab : > > /dev/vg01/vg01lv01 /home5/pgram/dev ext3 defaults 1 2 > > -- > > /regards > > Peter Gram > > Phone : +45 2527 7107 > Fax : +45 4466 8856 > > Miracle A/S > Kratvej 2 > 2760 Målev > http://miracleas.dk > I added my own entry in the rc.sysinit file after the root filesystem is made writable. So, here is my own entry (two lines below # DS ...: # The root filesystem is now read-write, so we can now log via syslog() directly.. if [ -n "$IN_INITLOG" ]; then IN_INITLOG= fi # DS Ok, now scan all volume groups for LVM and activate them /sbin/vgscan /sbin/vgchange -a y if ! grep -iq nomodules /proc/cmdline >/dev/null 2>&1 && [ -f /proc/ksyms ]; then USEMODULES=y else USEMODULES= fi It is near line 315 in my rc.sysinit file. I also have the initrd image made with lvmcreate_initrd and the appropriate entry in the lilo.conf file. I am using kernel 2.4.17 as well. -- ======================================= Daniel Savard Consultation Informatique Daniel Savard 551, boul. Sir-Wilfrid-Laurier suite 105 Beloeil, (Québec) Canada J3G 4J1 Tél: (450) 467-8014 Internet: dsavard@cids.ca ======================================= _______________________________________________ linux-lvm mailing list linux-lvm@sistina.com http://lists.sistina.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html