Hi
I have this problem that I hope some of you out there might be able to
help with ?
My problem is on boot of the machine I get a error from the mount
process that it can not mount and check my file system
"/dev/vg01/vg01lv01" and a option to go into singe user mode where I can
se that the "vgchange -a y" is not run to activate
the volume group. I have looked at the rc.sysinit and there is this
entry that should activate all defined volume groups.
Have any of you out in cyberspace seen the same problem with Redhat 7.2 ?
cut from the /etc/rc.d/rc.sysinit :
# LVM initialization
if [ -e /proc/lvm -a -x /sbin/vgchange -a -f /etc/lvmtab ]; then
action $"Setting up Logical Volume Management:" /sbin/vgscan &&
/sbin/vgchange -a y
fi
My setup :
HP Omnibook 6000 laptop
Redhat 7.2
I have installed the "new" 2.4.17 Linux kernel
VLM support works (That is I can create lv's and I use ext3 file system
on them)
I have added my lvm to fstab and are able to mount/umount the file
system without problems
cut from fstab :
/dev/vg01/vg01lv01 /home5/pgram/dev ext3 defaults 1 2
--
/regards
Peter Gram
Phone : +45 2527 7107
Fax : +45 4466 8856
Miracle A/S
Kratvej 2
2760 Målev
http://miracleas.dk
_______________________________________________
linux-lvm mailing list
linux-lvm@sistina.com
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
