Use BIT macro to simplify adding new bit masks.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/pmbus/adm1275.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 60aad9570f01..d34ba4f10c30 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -21,6 +21,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/bitops.h>
#include "pmbus.h"
enum chips { adm1075, adm1275, adm1276 };
@@ -30,28 +31,28 @@ enum chips { adm1075, adm1275, adm1276 };
#define ADM1275_PEAK_VOUT 0xd2
#define ADM1275_PMON_CONFIG 0xd4
-#define ADM1275_VIN_VOUT_SELECT (1 << 6)
-#define ADM1275_VRANGE (1 << 5)
-#define ADM1075_IRANGE_50 (1 << 4)
-#define ADM1075_IRANGE_25 (1 << 3)
-#define ADM1075_IRANGE_MASK ((1 << 3) | (1 << 4))
+#define ADM1275_VIN_VOUT_SELECT BIT(6)
+#define ADM1275_VRANGE BIT(5)
+#define ADM1075_IRANGE_50 BIT(4)
+#define ADM1075_IRANGE_25 BIT(3)
+#define ADM1075_IRANGE_MASK (BIT(3) | BIT(4))
#define ADM1275_IOUT_WARN2_LIMIT 0xd7
#define ADM1275_DEVICE_CONFIG 0xd8
-#define ADM1275_IOUT_WARN2_SELECT (1 << 4)
+#define ADM1275_IOUT_WARN2_SELECT BIT(4)
#define ADM1276_PEAK_PIN 0xda
-#define ADM1275_MFR_STATUS_IOUT_WARN2 (1 << 0)
+#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
#define ADM1075_READ_VAUX 0xdd
#define ADM1075_VAUX_OV_WARN_LIMIT 0xde
#define ADM1075_VAUX_UV_WARN_LIMIT 0xdf
#define ADM1075_VAUX_STATUS 0xf6
-#define ADM1075_VAUX_OV_WARN (1<<7)
-#define ADM1075_VAUX_UV_WARN (1<<6)
+#define ADM1075_VAUX_OV_WARN BIT(7)
+#define ADM1075_VAUX_UV_WARN BIT(6)
struct adm1275_data {
int id;
--
2.1.0
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
