The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Cc: Jean Delvare <jdelvare@xxxxxxx> Cc: Guenter Roeck <linux@xxxxxxxxxxxx> Cc: lm-sensors@xxxxxxxxxxxxxx --- drivers/hwmon/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 25d9e72627e9df97..9d29f42db1856747 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -509,7 +509,7 @@ config SENSORS_G762 config SENSORS_GPIO_FAN tristate "GPIO fan" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST depends on THERMAL || THERMAL=n help If you say yes here you get support for fans connected to GPIO lines. @@ -1186,7 +1186,7 @@ config SENSORS_PWM_FAN config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help If you say yes here you get support for the Sensiron SHT10, SHT11, SHT15, SHT71, SHT75 humidity and temperature sensors. -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
