On Thu, Mar 05, 2015 at 11:48:48AM -0500, Jon Torrey wrote: > Hi everyone, > ... > modprobe w83627hf returns an error with the following on dmesg | tail - > > *[ 1056.137920] w83627hf: Base address not set, skipping* The hardware monitoring function in the chip was not activated by the BIOS. Usually that means that nothing useful is connected to it. I have seen this on some Supermicro server boards, where hardware monitoring is handled by an IPMI chip. Enabling the chip manually from user space is technically possible, but I would not recommend it, and it would likely not help much (most likely you would only be able to monitor VBAT and VCC to the chip). Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
