Re: [PATCH] hwmon: (ibmpowernv) Use platform 'id_table' to probe the device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/04/2014 07:58 PM, Guenter Roeck wrote:
On 11/03/2014 11:30 PM, Neelesh Gupta wrote:
The current driver probe() function assumes the sensor device to be
alwary present and gets executed every time if the driver is loaded,
but the appropriate hardware could not be present.

So, move the platform device creation as part of platform init code
and use the 'id_table' to check if the device present or not.

Signed-off-by: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
---
  arch/powerpc/platforms/powernv/opal-sensor.c |   20 ++++++++
drivers/hwmon/ibmpowernv.c | 67 +++++++-------------------
  2 files changed, 39 insertions(+), 48 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal-sensor.c b/arch/powerpc/platforms/powernv/opal-sensor.c
index 10271ad..215c418 100644
--- a/arch/powerpc/platforms/powernv/opal-sensor.c
+++ b/arch/powerpc/platforms/powernv/opal-sensor.c
@@ -20,7 +20,9 @@

  #include <linux/delay.h>
  #include <linux/mutex.h>
+#include <linux/of_platform.h>
  #include <asm/opal.h>
+#include <asm/machdep.h>

  static DEFINE_MUTEX(opal_sensor_mutex);

@@ -64,3 +66,21 @@ out:
      return ret;
  }
  EXPORT_SYMBOL_GPL(opal_get_sensor_data);
+
+static __init int opal_sensor_init(void)
+{
+    struct platform_device *pdev;
+    struct device_node *sensor;
+
+    sensor = of_find_node_by_path("/ibm,opal/sensors");
+    if (sensor) {
+        pdev = of_platform_device_create(sensor, "opal-sensor", NULL);
+        of_node_put(sensor);
+    } else {
+        pr_info("Opal node 'sensors' not found\n");

Hi Neelesh,

this is either an error and should be reported with pr_err, or it is
a valid condition and should be reported with pr_debug or not at all.

Which one is it ?

Should be logged using pr_err(), will fix and send the next version.

Thanks,
Neelesh


Also, can you put this code into a 'normal' error handler instead of using if/else ?

    if (!sensor) {
        pr_err("Opal node 'sensors' not found\n");
        return -ENODEV;
    }
    pdev = of_platform_device_create(sensor, "opal-sensor", NULL);
    ...

This would make the code flow easier to understand.

Thanks,
Guenter

+        return -ENODEV;
+    }
+
+    return PTR_ERR_OR_ZERO(pdev);
+}
+machine_subsys_initcall(powernv, opal_sensor_init);
diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
index 6a30eee..c7577b8 100644
--- a/drivers/hwmon/ibmpowernv.c
+++ b/drivers/hwmon/ibmpowernv.c
@@ -74,9 +74,6 @@ struct platform_data {
      u32 sensors_count; /* Total count of sensors from each group */
  };

-/* Platform device representing all the ibmpowernv sensors */
-static struct platform_device *pdevice;
-
static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr,
                 char *buf)
  {
@@ -99,7 +96,7 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr,
      return sprintf(buf, "%u\n", x);
  }

-static int __init get_sensor_index_attr(const char *name, u32 *index,
+static int get_sensor_index_attr(const char *name, u32 *index,
                      char *attr)
  {
      char *hash_pos = strchr(name, '#');
@@ -136,7 +133,7 @@ static int __init get_sensor_index_attr(const char *name, u32 *index, * which need to be mapped as fan2_input, temp1_max respectively before
   * populating them inside hwmon device class.
   */
-static int __init create_hwmon_attr_name(struct device *dev, enum sensors type, +static int create_hwmon_attr_name(struct device *dev, enum sensors type,
                       const char *node_name,
                       char *hwmon_attr_name)
  {
@@ -172,7 +169,7 @@ static int __init create_hwmon_attr_name(struct device *dev, enum sensors type,
      return 0;
  }

-static int __init populate_attr_groups(struct platform_device *pdev)
+static int populate_attr_groups(struct platform_device *pdev)
  {
      struct platform_data *pdata = platform_get_drvdata(pdev);
      const struct attribute_group **pgroups = pdata->attr_groups;
@@ -180,11 +177,6 @@ static int __init populate_attr_groups(struct platform_device *pdev)
      enum sensors type;

      opal = of_find_node_by_path("/ibm,opal/sensors");
-    if (!opal) {
-        dev_dbg(&pdev->dev, "Opal node 'sensors' not found\n");
-        return -ENODEV;
-    }
-
      for_each_child_of_node(opal, np) {
          if (np->name == NULL)
              continue;
@@ -221,7 +213,7 @@ static int __init populate_attr_groups(struct platform_device *pdev) * to the name required by the higher 'hwmon' driver like fan1_input, temp1_max
   * etc..
   */
-static int __init create_device_attrs(struct platform_device *pdev)
+static int create_device_attrs(struct platform_device *pdev)
  {
      struct platform_data *pdata = platform_get_drvdata(pdev);
      const struct attribute_group **pgroups = pdata->attr_groups;
@@ -280,7 +272,7 @@ exit_put_node:
      return err;
  }

-static int __init ibmpowernv_probe(struct platform_device *pdev)
+static int ibmpowernv_probe(struct platform_device *pdev)
  {
      struct platform_data *pdata;
      struct device *hwmon_dev;
@@ -309,52 +301,31 @@ static int __init ibmpowernv_probe(struct platform_device *pdev)
      return PTR_ERR_OR_ZERO(hwmon_dev);
  }

+static const struct platform_device_id opal_sensor_driver_ids[] = {
+    {
+        .name = "opal-sensor",
+    },
+    { }
+};
+MODULE_DEVICE_TABLE(platform, opal_sensor_driver_ids);
+
  static struct platform_driver ibmpowernv_driver = {
-    .driver = {
-        .owner = THIS_MODULE,
-        .name = DRVNAME,
+    .probe        = ibmpowernv_probe,
+    .id_table    = opal_sensor_driver_ids,
+    .driver        = {
+        .owner    = THIS_MODULE,
+        .name    = DRVNAME,
      },
  };

  static int __init ibmpowernv_init(void)
  {
-    int err;
-
-    pdevice = platform_device_alloc(DRVNAME, 0);
-    if (!pdevice) {
-        pr_err("Device allocation failed\n");
-        err = -ENOMEM;
-        goto exit;
-    }
-
-    err = platform_device_add(pdevice);
-    if (err) {
-        pr_err("Device addition failed (%d)\n", err);
-        goto exit_device_put;
-    }
-
-    err = platform_driver_probe(&ibmpowernv_driver, ibmpowernv_probe);
-    if (err) {
-        if (err != -ENODEV)
-            pr_err("Platform driver probe failed (%d)\n", err);
-
-        goto exit_device_del;
-    }
-
-    return 0;
-
-exit_device_del:
-    platform_device_del(pdevice);
-exit_device_put:
-    platform_device_put(pdevice);
-exit:
-    return err;
+    return platform_driver_register(&ibmpowernv_driver);
  }

  static void __exit ibmpowernv_exit(void)
  {
      platform_driver_unregister(&ibmpowernv_driver);
-    platform_device_unregister(pdevice);
  }

  MODULE_AUTHOR("Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>");





_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors




[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux