Function macros make the code harder to read and increase code size,
so drop them.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/lm77.c | 155 +++++++++++++++++++++++---------------------------
1 file changed, 71 insertions(+), 84 deletions(-)
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 2e0918e..b792898 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -43,16 +43,20 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
#define LM77_REG_TEMP_MIN 0x04
#define LM77_REG_TEMP_MAX 0x05
+enum temp_index {
+ t_input = 0,
+ t_crit,
+ t_min,
+ t_max
+};
+
/* Each client has this additional data */
struct lm77_data {
struct device *hwmon_dev;
struct mutex update_lock;
char valid;
unsigned long last_updated; /* In jiffies */
- int temp_input; /* Temperatures */
- int temp_crit;
- int temp_min;
- int temp_max;
+ int temp[4]; /* index using temp_index */
int temp_hyst;
u8 alarms;
};
@@ -106,19 +110,19 @@ static struct lm77_data *lm77_update_device(struct device *dev)
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
dev_dbg(&client->dev, "Starting lm77 update\n");
- data->temp_input =
+ data->temp[t_input] =
LM77_TEMP_FROM_REG(lm77_read_value(client,
LM77_REG_TEMP));
data->temp_hyst =
LM77_TEMP_FROM_REG(lm77_read_value(client,
LM77_REG_TEMP_HYST));
- data->temp_crit =
+ data->temp[t_crit] =
LM77_TEMP_FROM_REG(lm77_read_value(client,
LM77_REG_TEMP_CRIT));
- data->temp_min =
+ data->temp[t_min] =
LM77_TEMP_FROM_REG(lm77_read_value(client,
LM77_REG_TEMP_MIN));
- data->temp_max =
+ data->temp[t_max] =
LM77_TEMP_FROM_REG(lm77_read_value(client,
LM77_REG_TEMP_MAX));
data->alarms =
@@ -135,70 +139,56 @@ static struct lm77_data *lm77_update_device(struct device *dev)
/* sysfs stuff */
/* read routines for temperature limits */
-#define show(value) \
-static ssize_t show_##value(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- struct lm77_data *data = lm77_update_device(dev); \
- return sprintf(buf, "%d\n", data->value); \
-}
-
-show(temp_input);
-show(temp_crit);
-show(temp_min);
-show(temp_max);
-
-/* read routines for hysteresis values */
-static ssize_t show_temp_crit_hyst(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+ char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm77_data *data = lm77_update_device(dev);
- return sprintf(buf, "%d\n", data->temp_crit - data->temp_hyst);
-}
-static ssize_t show_temp_min_hyst(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct lm77_data *data = lm77_update_device(dev);
- return sprintf(buf, "%d\n", data->temp_min + data->temp_hyst);
+
+ return sprintf(buf, "%d\n", data->temp[attr->index]);
}
-static ssize_t show_temp_max_hyst(struct device *dev,
- struct device_attribute *attr, char *buf)
+
+/* read routines for hysteresis values */
+static ssize_t show_temp_hyst(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm77_data *data = lm77_update_device(dev);
- return sprintf(buf, "%d\n", data->temp_max - data->temp_hyst);
+ return sprintf(buf, "%d\n", data->temp[attr->index] - data->temp_hyst);
}
/* write routines */
-#define set(value, reg) \
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct lm77_data *data = i2c_get_clientdata(client); \
- long val; \
- int err = kstrtol(buf, 10, &val); \
- if (err) \
- return err; \
- \
- mutex_lock(&data->update_lock); \
- data->value = val; \
- lm77_write_value(client, reg, LM77_TEMP_TO_REG(data->value)); \
- mutex_unlock(&data->update_lock); \
- return count; \
-}
+static ssize_t set_temp(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm77_data *data = i2c_get_clientdata(client);
+ int reg, err;
+ long val;
-set(temp_min, LM77_REG_TEMP_MIN);
-set(temp_max, LM77_REG_TEMP_MAX);
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ reg = attr->index == t_min ? LM77_REG_TEMP_MIN : LM77_REG_TEMP_MAX;
+
+ mutex_lock(&data->update_lock);
+ data->temp[attr->index] = val;
+ lm77_write_value(client, reg, LM77_TEMP_TO_REG(val));
+ mutex_unlock(&data->update_lock);
+ return count;
+}
/*
* hysteresis is stored as a relative value on the chip, so it has to be
* converted first
*/
-static ssize_t set_temp_crit_hyst(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t set_temp_hyst(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct lm77_data *data = i2c_get_clientdata(client);
unsigned long val;
@@ -209,7 +199,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev,
return err;
mutex_lock(&data->update_lock);
- data->temp_hyst = data->temp_crit - val;
+ data->temp_hyst = data->temp[attr->index] - val;
lm77_write_value(client, LM77_REG_TEMP_HYST,
LM77_TEMP_TO_REG(data->temp_hyst));
mutex_unlock(&data->update_lock);
@@ -231,11 +221,11 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr,
return err;
mutex_lock(&data->update_lock);
- oldcrithyst = data->temp_crit - data->temp_hyst;
- data->temp_crit = val;
- data->temp_hyst = data->temp_crit - oldcrithyst;
+ oldcrithyst = data->temp[t_crit] - data->temp_hyst;
+ data->temp[t_crit] = val;
+ data->temp_hyst = data->temp[t_crit] - oldcrithyst;
lm77_write_value(client, LM77_REG_TEMP_CRIT,
- LM77_TEMP_TO_REG(data->temp_crit));
+ LM77_TEMP_TO_REG(data->temp[t_crit]));
lm77_write_value(client, LM77_REG_TEMP_HYST,
LM77_TEMP_TO_REG(data->temp_hyst));
mutex_unlock(&data->update_lock);
@@ -250,34 +240,31 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
}
-static DEVICE_ATTR(temp1_input, S_IRUGO,
- show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
- show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
- show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
- show_temp_max, set_temp_max);
-
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
- show_temp_crit_hyst, set_temp_crit_hyst);
-static DEVICE_ATTR(temp1_min_hyst, S_IRUGO,
- show_temp_min_hyst, NULL);
-static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
- show_temp_max_hyst, NULL);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, t_input);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp,
+ set_temp_crit, t_crit);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp,
+ t_min);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp,
+ t_max);
+
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst,
+ set_temp_hyst, t_crit);
+static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO, show_temp_hyst, NULL, t_min);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp_hyst, NULL, t_max);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 1);
static struct attribute *lm77_attributes[] = {
- &dev_attr_temp1_input.attr,
- &dev_attr_temp1_crit.attr,
- &dev_attr_temp1_min.attr,
- &dev_attr_temp1_max.attr,
- &dev_attr_temp1_crit_hyst.attr,
- &dev_attr_temp1_min_hyst.attr,
- &dev_attr_temp1_max_hyst.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
--
1.7.9.7
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
